X-10GD Omron, X-10GD Datasheet

Page 1

... The plungers of reverse-type models are continuously pressed by the compression coil springs and the plungers are freed by operating the levers. CSM_X_DS_E_3_1 Screw terminal Model Model X-10G X-10G-B X-10GS X-10GS-B X-10GD X-10GD-B X-10GQ X-10GQ-B X-10GQ22 X-10GQ22-B X-10GQ21 X-10GQ21-B X-10GL X-10GL-B X-10GW21 X-10GW21-B X-10GW ...

Page 2

... The values are for the pin plunger models. (Contact your OMRON representative for other models.) *2. Malfunction max. Structure Contact Form (SPDT) (+) COM NC NO Note: With the reverse-type models (X-10GM@), the NC and NO terminal arrangements are reversed. Contact Specification Inductive load (A) Contacts Motor load load NO NC ...

Page 3

... N·m. Two, 4.2-dia. mounting holes or M4 screw holes 25.4 ± 0.1 The Switch can be panel mounted, provided that the hexagonal nut of the actuator is tightened to a torque of 2.94 to 4.9 N·m. Panel Mount Plunger Panel Mount Roller Plunger +0.2 12.5 dia. ...

Page 4

... Note: Do not use both the M12 mounting screw and the mounting holes in the case at the same time. Doing so will cause stress to be applied to the Switch, possibly damaging the case or cover. 4.8 *2 *1. Stainless-steel spring lever *2. Three vent holes X-10GS-B X-10GD-B X-10GQ-B 5.00 N 5.00 N 5.00 N 1.12 N 1.12 N 1.12 N ...

Page 5

... X-10GW4-B 26.2 20.2 17.4 Hinge Roller Lever X-10GW2-B 26 20.2 17.4 Reverse Short Hinge Lever X-10GM22 1*1 18.65 20.2 17.4 Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Model Operating X-10GW21-B X-10GW-B Characteristics OF max. 2. min. 0.31 N 0.14 N − PT max. ...

Page 6

... Precautions for Safe Use Terminal Connection When soldering lead wires to the Switch, make sure that the capacity of the soldering iron maximum. Do not take more than solder any part of the Switch. The characteristics of the Switch will deteriorate if a soldering iron with a capacity of more than applied to any part of the Switch for more ...

Page 7

... To side-mount the panel-mount Switch to the panel with screws, remove the hexagonal nut from the actuator. • Too large a dog angle and too fast operating speed may damage the Switch when the Switch is side-mounted on the panel. • Too fast operating speed and too long overtravel of the roller plunger Switch may result in damage to the Switch ...

Page 8

... Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS ...