V4KU-01JF-001 Omron, V4KU-01JF-001 Datasheet - Page 7

• Manufacturer Part Number: V4KU-01JF-001
• Description: INSERT CARD READER (USB)
• Manufacturer: Omron
• Series: V4KUr

Specifications of V4KU-01JF-001

• Card Reader Type: Magnetic, Smart Card (IC)
• Interface: USB
• Card Read/write Type And Tracks: Magnetic - Read Tracks 1, 2, 3, Smart Card - R/W
• Card Reading Direction: Insertion/Ejection
• Card Standard: ISO 1, ISO 2, ISO 3, JIS II
• Supply Voltage: 12V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Card Speed: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q2180254; V4KU01JF001

5.3 ICC function
[1] Number and location of contacts on ICC
[2] Applicable ICC
5.4 SAM
[1] 1 SAM controller is equipped with shipment. 1 SAM socket is mounted on the PCB.
[2] SAM specification
5.5 Shutter function
[1] This shutter is equipped on the insertion slot of the C/R. It opens automatically by inserting the card.
It prevents foreign objects like dusts and coins from intruding to inside.
[2] This shutter should open by inserting the card that is more than 53.92mm in width.
5.6 Lock function
[1] Pin type lock mechanism is equipped to hold the card during operation of ICC in response to
command from host.
[2] This lock mechanism can be controlled by the command from the host.
[3] The condition of this lock mechanism can be checked by the command and response.
[4] This lock mechanism is released automatically at the power failure.
[5] This Lock mechanism works under the below conditions
<Notice>
controller and FW in advance, if ICC is special card. Because ISO standard and ICC(s) are
subject to frequent modification. OMRON supports you for capability of performing customer’s
ICC, provided with ICC and its specification.
(1) Asynchronous card
(2) Synchronous card
(1) The card is inserted completely.
(2) The card does not exist inside of C/R.
Number and location of contacts on ICC are specified in ISO 7816-2 figure 2.
OMRON asks customers to check the performance of ICC with OMRON standard ICC
1) Support ICC
2) Protocol
3) Data byte reading/writing
4) Clock during/after ATR
5) Communication speed
6) Vpp
7) Vcc
1) Support ICC
2) Vcc
3) Vpp
1) Support SAM chip
2) Vpp
3) Vcc
In conformity to ISO/IEC 7816-1/2/3, EMV4.0 Level1
T=0 and T=1
Inverse convention (MSB first, negative logic) and direct
convention (LSB first, positive logic)
3.5712 MHz(Conform to ISO / IEC 7816-3)
T=0: 1etu = 372/ (3.5712 x 10
T=1: 1etu = (372/D) x 1/(3.5712 x 10
D=1(Default), 2, 4
In conformity to ISO/IEC 7816-1/2/10, SLE4442/4428/4432
Not connected
5V / 3V (Type A and Type B)
5V
Not connected
In conformity to ENV1375-1(ID000)
Not connected
5V/3V
6
) sec (Constant Value)
MTA-B-03023 A (7/12)
6
) sec