E8CC-B10C Omron, E8CC-B10C Datasheet - Page 9

• Manufacturer Part Number: E8CC-B10C
• Description: PRESSURE SENSOR:0to980kPa,wLCD
• Manufacturer: Omron
• Series: E8CCr

Specifications of E8CC-B10C

• Pressure Type: Gauge
• Operating Pressure: 142.14 PSI, 980 kPa
• Port Size: Male, 1/8" (3.175mm) 27 NPT
• Output: Digital
• Voltage - Supply: 12 V ~ 24 V
• Termination Style: Cable
• Operating Temperature: -10°C ~ 55°C
• Package / Case: Module
• Mounting Style: DIN Rail
• Maximum Operating Temperature: + 55 C
• Minimum Operating Temperature: - 10 C
• Operating Supply Voltage: 15 V, 18 V
• Output Voltage: 1 V to 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: E8CCB10C

E8CB/E8CC
J MOUNTED TO A DIN-RAIL MOUNTING BRACKET
Precautions
J MOUNTING
Diaphragm
If the diaphragm is damaged, the Pressure Sensor will not
operate correctly. Do not insert a screwdriver or steel wire into
the pressure port.
The pressure port has an NPT 1/8 taper screw and M5 female
screw. Apply sealing tape around the female taper screw so that
no pressure leakage will occur.
Make sure that the tightening torque of the M5 female screw is
3.9 N S m (2.87 ft • lbs) or less.
If the Pressure Sensor is directly connected to a conduit, be sure
to apply a wrench to the pressure port, not to the plastic case.
Pressure port
(0.22)
5.5
(1.16)
29.5
(1.10)
28
2
(0.10)
4-dia. vinyl-insulated round cable
with 4 cores; standard length: 2 m
2.6
(0.44)
11.3
10
J DIN-RAIL MOUNTING BRACKET (E8CC)
Mounting
Removing
J WIRING
If no linear output is used, cut off the black lead wire and apply
insulation tape to the lead wire so that it will not come in contact
with any other terminal.
DIN-rail mounting bracket (provided with each model)
(2.17)
(2.22)
56.3
55
(2.64)
•
•
•
67
DIN-rail mounting
(0.15)
Fit the front part onto the bracket.
Press the rear part onto the bracket.
Apply a flat-blade screwdriver to the rear hook. Then the
Pressure Sensor can be removed easily.
3.75
(0.24)
6
(0.34)
Two, M4 mounting
holes
(0.75)
(0.12)
8.5
19
3
(0.71)
18
(0.59)
15
NPT 1/8
(0.06)
1.5
M5 depth: 7.5
E8CB/E8CC
(0.30)