A3AT-90L1-00EG Omron, A3AT-90L1-00EG Datasheet - Page 9
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
A3AT-90L1-00EG
Manufacturer Part Number
A3AT-90L1-00EG
Description
ASSY.L.P.B.INCLD.FLANGE/SPRING
Manufacturer
Omron
Series
A3Ar
Type
Illuminatedr
Specifications of A3AT-90L1-00EG
Circuit
SPST-NO
Switch Function
Off-On
Contact Rating @ Voltage
6A @ 125VAC
Actuator Type
Round Button
Illumination Type, Color
LED, Green
Illumination Voltage (nominal)
2.1 VDC
Mounting Type
Panel Mount
Termination Style
Solder Lug
Current Rating (max)
6 Amps
Voltage Rating Ac
250 volts
Voltage Rating Dc
30 Volts
Contact Configuration
SPST-NO
Contact Voltage Ac Nom
250V
Contact Voltage Dc Nom
250V
Contact Current Max
6A
Actuator Style
Round
Actuator / Cap Colour
Green
Illumination Colour
Green
Svhc
No
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
A3AT90L100EG
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
A3AT-90L1-00EG
Manufacturer:
OMRON/欧姆龙
Quantity:
20 000
A3A
Installation
Mounting Switch Unit on a Panel
Mount Leaf Spring
Press the leaf spring into the fitted groove on the upper surface of
the switch unit. For an easier fitting, first fit one side of the leaf spring,
then press the other side into the fitting groove.
Note: Be sure to fit the leaf spring exactly into the groove, and do
Mount Flange on Panel
Insert the flange from the front surface of the panel.
The flange has two opposing guides to facilitate its insertion into the
panel cutout hole. Be sure the flange does not remain tilted with re-
spect to the panel surface after being installed.
Note: The mounting direction of the flange determines the
Fit Flange with Switch Unit
While holding the flange, insert the opposing supports into the gaps
between the leaf spring and switch unit on the longer sides of the
housing, and fit the rectangular hole of the flange with the projec-
tions of the switch housing.
Note: Completely remove any burrs on the panel cutout surface;
Cross Section
not allow it to slip out of the groove.
orientation of the switch unit.
otherwise, the flange and switch unit will not attach solidly.
Panel
Panel (t = 1 to 1.6 mm)
Flange
Flange
Leaf spring
fitting groove
Switch unit
Leaf spring
Guide
Projection
Support
Panel
Removing Switch Unit
Insert a small flat-bladed screwdriver or tweezers into the flange
support exposed on the rear of the panel. Pry up on each side to pull
out the switch unit.
Note: Do not pry up the flange support more than necessary or
the switch holding portions may be damaged.
Panel
Flat-bladed screwdriver
or tweezers
A3A
9