NV3W-KBA04 Omron, NV3W-KBA04 Datasheet - Page 3

• Manufacturer Part Number: NV3W-KBA04
• Description: Display Protect Sheet For NV3W
• Manufacturer: Omron

Specifications of NV3W-KBA04

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

4
Easy Connection to External Devices for Easy Maintenance
Supply Power from the PLC
With 5-V NV3W models, 5-V can be supplied from the PLC
via the PLC Connecting Cable.This reduces wiring work and
eliminates the need for a special power supply for the PT.
Internal Storage of Required Data in the PT
*An XW2Z-200T-4 PLC Connecting Cable is required to supply power from the PLC.
*With 24-V PTs, power must be supplied from an external power supply.
An NV-series PT can be operated without a battery.
No maintenance battery is required.
Serial Communications/Power Supply Connector
Supplying 5-V from the PLC
supply not required
External power
NV3W
Battery-free Operation
Compact Horizontal Models
PLC Connecting Cable
with 5-V Line
Host Link connection
RS-232C Cable
XW2Z-200T-4
5-V
power supply
PLC
NV3W Only
CP/CJ/CS
series
PLC
Monochrome STN
NV3W-MG 0 (L)
Compatibility
supply
power
AC
NV-Designer
NV Configuration
Base Screens
Keyboard Screens
Data Backed Up without a Battery
Transfer Ladder Programs and
PT Screens without Changing the Cable
Ladder programs can be transferred, debugged, or monitored for an
OMRON PLC from the CX-Programmer running on a computer connected
to the NV-series PT while communicating through the NV-series PT.
*Refer to Support Software on page 7 for
applicable versions of the CX-One.
Same cable as for
the NV-Designer
Monochrome STN
NV3W-MR 0(L)
Computer running
NV-Designer
CX-Programmer
Programming Device Connecting Cable
NV-TOL-3M
through the PT
Communicate
Recipes
Write Address Data
Flow Display Data
Tool Port
USB-Serial
Conversion Cable
CS1W-CIF31
Ladder diagrams can be transferred
and the PLC can be monitored from
the CX-Programmer.
No need to change
the cable between
the PT and PLC.
Host Link
connection
Data required for
operation is
backed up
CP/CJ/CS
Compatibility
series
PLC
NV4W
Internal Storage of Required Data in the PT
An NV-series PT can be operated without a battery.
No maintenance battery is required.
NV Configuration
Base Screens
Keyboard Screens
This connector supplies 24 VDC.
4.6 inch
Serial Communications/Power Supply Connector
Data Backed Up without a Battery
Battery-free Operation
Compact Horizontal Models
NV-Designer
Recipes
Write Address Data
Flow Display Data
24-V power supply
PLC
Data required for
operation is
backed up
（Mini-B）
Monochrome STN
Commercially
available
USB cable
NV4W-MG 1
Back up PLC memory in the PT with an optional battery.
An optional battery can be mounted in an NV4Q PT to back up specified
addresses from PLC memory. This allows you, for example, to back up memory
areas that are not held in the PLC when using a CP1E PLC without a battery.
Up to 24 words of
PLC memory
Clock data
Data That Can Be Backed Up with a Battery
High-speed Screen Transfers with
Commercially Available USB Cable
A USB interface is provided to effectively use computer
software environments.Screens that are created on the
computer can be quickly transferred to the PT using a
commercially available USB cable (Mini-B).
Transfer Ladder Programs and
PT Screens without Changing the Cable
An SD memory card slot (2 GB max.)
is provided as a standard feature
Use SD memory cards to easily
back up and restore screen
data.
Monochrome STN
Internal PT memory
Alarm history
Password
NV4W-MR□1
Optional Battery
SD Memory Card
USB1.1
Tool Port
CP1E
PLC memory
words from
Compatibility
Back up
NV-BAT01
5