153-330-04 MARL, 153-330-04 Datasheet - Page 2

• Manufacturer Part Number: 153-330-04
• Description: Red/Green 3mm Right Angle, Surface Mount PCB Mounting Style, Standard Intensity Bi-Color LED, 2.0/2.2Vdc At 20mA.
• Manufacturer: MARL

How to Order:
website: www.marl.co.uk • email: [e-mail] •
•
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service.
for products or service.
Polycarbonate
This material offers UL94 V-0 flame retardancy* and a high impact strength. This material has a melt point of 290-340°C and is suitable for use in
the majority of automatic soldering processes.
*Material test thickness 1.6mm
LED Polarity
Anode identification is shown in the dimensional diagram. For the 2 pin Bi-colour units the standard colour configuration is red anode to the ‘+’
sign.
Bi-colour
2 Pin Operation
T o achieve the second colour for a 2 pin Bi-colour unit the supply must be reversed, standard colour configuration for these units is red anode to
the ‘+’ sign.
Electro-static Discharge (ESD)
Build up of electrostatic discharge occurs in many situations involving people moving and handling products. The range of possible situations is
very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to
these levels handles a ‘static sensitive device’, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that
precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static
sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over a large range of the
wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing
and despatch. We recommend all users of LED based products follow the guidelines of BS 100015.
Note:
T elephone [phone]
Dimensions in mm (Typical)
Not to scale
© MARL INTERNATIONAL LTD 2007 : DS 075/07
All luminous intensity figures refer to the unmodified discrete LED.
•
Fax: [phone]
Marl International reserve the right to alter without notice the specification or any conditions of supply
Issue 2
Ø1
4.5
1.27
Housing Material
MARL LOGO
0.2 PROUD
153 Series
LEDs
SAMPLES AVAILABLE
2.4
3.81
6.5
1.3
1
Mounting
Footprint
1.54
1.0
1.27
Ø1.2
BS EN ISO 9001:2000
Approved Manufacturer
Page 2 of 2