XG8A-5031 Omron, XG8A-5031 Datasheet - Page 5

• Manufacturer Part Number: XG8A-5031
• Description: CONNECTOR
• Manufacturer: Omron
• Series: XG8r

Specifications of XG8A-5031

• Contact Type: Male Pin
• Connector Type: Header, Unshrouded
• Number Of Positions: 50
• Number Of Positions Loaded: All
• Pitch: 0.100" (2.54mm)
• Number Of Rows: 1
• Mounting Type: Through Hole
• Termination: Solder
• Color: Black
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Contact Finish: -
• Contact Finish Thickness: -
• Row Spacing: -
• Fastening Type: -
• Contact Mating Length: -
• Lead Free Status / Rohs Status: Details
• Other names: XG8A5031; XG8A5031NC

Accessories
■ Top Lock Levers
XG5Z-0002 - “Lock Lever”
Can be used to lock XG8W Double-row Right-angle Terminal Plugs
to XG4M Flat Cables and XG5M-N Discrete-wire IDC Connectors.
(See XG4 and XG5 Datasheets).
They cannot be used with XG8W Double-row Straight Terminal Plugs.
Note: Order the above model in multiples of 10 pieces.
Precautions
■ Correct Use
Dividing the XG8W (with Straight Terminals), XG8V,
XG8A, and XG8B
The above mentioned models may have the number of terminals and
rows reduced prior to pcb assembly, using the following method:
• Using a Cutter, make a cut on the slot as indicated by the dotted
• XG8W’s with right-angle terminals are not designed to be divided in
line in the diagram. Then fold the Plug manually in the direction of
the arrows.
this manner. Do not divide the XG8W with right-angle terminals.
Instead, use the XG8B Header Plug Strip with right-angle termi-
nals, if a double-row header plug with right-angle terminals must be
divided to reduce the number of terminal rows.
(1) Using a cutter,
(2) Manually fold in
make a cut along
the dotted line.
the direction of the
arrows.
Standard Unshrouded Header Plug
Mounting the Lock Lever
Insert the tab on the Lock Lever into the hole on a Socket with a
polarity guide. In this way, it can be locked with XG8W Right-angle
Terminal Plugs.
Automated Soldering Conditions (Jet Flow)
1. Soldering temperature: 250 ±5°C
2. Continuous soldering time: Within 5 s
XG8
Polarizing guide hole XG4M
Tab
Lock lever
XG8
75