V-10G-4A4-K Omron, V-10G-4A4-K Datasheet - Page 9

• Manufacturer Part Number: V-10G-4A4-K
• Description: MINIATURE BASIC SWITCH
• Manufacturer: Omron
• Series: Vr

Specifications of V-10G-4A4-K

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 10A @ 250VAC
• Actuator Type: Round (Pin Plunger)
• Mounting Type: Chassis Mount
• Termination Style: Solder, Quick Connect - .187" (4.7mm)
• Operating Force: 100gf
• Pole Throw Configuration: SPDT
• Switch Function Configuration: N.O./N.C.
• Actuator Style: Pin Plunger
• Current Rating (max): 10A
• Ac Voltage Rating (max): 250VVAC
• Dc Voltage Rating (max): 250VVDC
• Mechanical Life: 50000000
• Terminal Type: Quick Connect/Solder
• Product Height (mm): 21.6mm
• Product Depth (mm): 10.3mm
• Product Length (mm): 37.8mm
• Operating Temp Range: -25C to 80C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: V10G4A4K

Precautions
■ Mounting
The switch is mounted with two M3 screws. When doing so, use an
appropriate screwdriver and tighten the screws at a torque of 4 to 6
kg-cm.
To solder the lead to the terminal, apply a soldering iron rated at 60
W max. quickly (within 5 seconds) with the actuator at the free posi-
tion.
Note that applying a soldering iron for too long a time or using one
that is rated at more than 60 W may degrade the switch characteris-
tics.
■ Reverse-Operation,
■ Reverse-operation,
VAM
VAM-1
Long Hinge Lever
Simulated Roller Lever
■ Operation
Make sure that the operating body pushes the switch actuator with
an adequate force when the switch is to be operated, and that it does
not touch the actuator when the switch is released.
Do not change the operating position by modifying the actuator.
Do not use the switch in a application where the operating speed is
extremely slow or the actuator is set in the midpoint between the free
position and operating position.
Install the pin plunger switch so that the operating force is applied in
alignment with the stroke of the actuator. The switch should be set so
that its stroke is in the range of 60 to 90% of the rated OT (minimum
value) when the switch has been operated.
Snap Action Switch
V
9