G3F-203SN DC5-24 Omron, G3F-203SN DC5-24 Datasheet - Page 6
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
G3F-203SN DC5-24
Manufacturer Part Number
G3F-203SN DC5-24
Description
SOLID STATE RELAY
Manufacturer
Omron
Series
G3Fr
Datasheet
1.G3FD-X03SN-VD_DC5-24.pdf
(7 pages)
Specifications of G3F-203SN DC5-24
Circuit
SPST-NO (1 Form A)
Output Type
AC, Zero Cross
Load Current
3A
Voltage - Input
4 ~ 28VDC
Voltage - Load
75 ~ 264 V
Mounting Type
Socket
Termination Style
Socketable
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
On-state Resistance
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
G3F-203SNDC5-24
G3F203SNDC524
G3F203SNDC524
Safety Precautions
Refer to Safety Precautions for All Solid State Relays.
■ Precautions for Correct Use
Please observe the following precautions to prevent failure to
operate, malfunction, or undesirable effect on product performance.
Connection
The SSR for DC switching use can connect to a load regardless of
the polarity of the positive and negative output terminals.
Close Mounting of Multiple Relays
If multiple Relays are mounted side by side, be aware that the outer
wall of each SSR works as a heat sink.
The SSR casing serves to dissipate heat. Install the Relays so that
they are adequately ventilated. If poor ventilation is unavoidable,
reduce the load current by half.
Protective Terminal
When using for AC inductive loads, connect the load terminals of the
SSR to an inrush absorber (varistor).
EMC Directive Compliance
1. AC-switching models comply with EMC Directives under the
2. DC-switching models comply with EMC Directives under the
• Connect a varistor between the output terminals.
• Connect a film capacitor to the load power supply.
• The input cable must be less than 3 m.
• The input cable must be less than 10 m.
following conditions ("-VD" models only).
following conditions ("-VD" models only).
Less than 10 m
Varistor: 470 V, 0.6 W
Film capacitor: 1 µF, 250 VAC
Less than 3 m
Input
Input
G3FD-VD
G3F-VD
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Output
Output
Varistor
In the interest of product improvement, specifications are subject to change without notice.
Load
Film Capacitor
Load
G3F/G3FD
6