G2RV-SL500-AC/DC24 Omron, G2RV-SL500-AC/DC24 Datasheet - Page 12

• Manufacturer Part Number: G2RV-SL500-AC/DC24
• Description: GP Power Relay & Socket
• Manufacturer: Omron

Specifications of G2RV-SL500-AC/DC24

• Relay Type: General Purpose
• Coil Voltage Vac Nom: 24V
• Coil Voltage Vdc Nom: 24V
• Contact Current Max: 6A
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 30V
• Contact Configuration: SPDT
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Precautions
Precautions for Connection
• Do not move the screwdriver up, down, or from side to side while it
• Do not insert the screwdriver at an angle. Doing so may break the
• Do not insert two or more wires in the hole. Wires may come in
• Insert the screwdriver along the hole wall as shown below.
12
is inserted in the hole. Doing so may cause damage to internal
components (e.g., deformation of the clamp spring or cracks in the
housing) or cause deterioration of insulation.
side of socket and result in a short-circuit.
contact with the spring causing a temperature rise or be subject to
sparks.
Cat. No. J11E-EN-01A
Slim Relay
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Screwdriver
G2RV
In the interest of product improvement, specifications are subject to change without notice.
• If lubricating liquid, such as oil, is present on the tip of screwdriver,
• Insert the screwdriver into the bottom of the hole. It may not be
General Precautions
• Do not use the product if it has been dropped on the ground.
• Confirm that the socket is securely attached to the mounting track
• Ensure that the socket is not charged during wiring and
• Do not pour water or cleansing agents on the product. Doing so
• Do not use the socket in locations subject to solvents or alkaline
• Do not use the socket in locations subject to ultraviolet light (e.g.,
• Do not dispose the product in fire.
Removing from Mounting Rail
To remove the socket from the mounting rail, insert the tip of
screwdriver in the fixture rail, and move it in the direction shown
below.
the screwdriver may fall out resulting in injury to the operator.
possible to connect cables properly if the screwdriver is inserted
incorrectly.
Dropping the product may adversely affect performance.
before wiring. If the socket is mounted insecurely it may fall and
injure the operator.
maintenance. Not doing so may result in electric shock.
may result in electric shock.
chemicals.
direct sunlight). Doing so may result in markings fading, rust,
corrosion, or resin deterioration.