DZ-10GW2-1B Omron, DZ-10GW2-1B Datasheet - Page 5

• Manufacturer Part Number: DZ-10GW2-1B
• Description: BASIC SWITCH
• Manufacturer: Omron
• Series: DZr

Specifications of DZ-10GW2-1B

• Circuit: DPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 10A @ 125VAC
• Actuator Type: Lever, Roller
• Mounting Type: Chassis Mount
• Termination Style: Screw Terminal
• Operating Force: 213gf
• Contact Form: DPDT
• Contact Rating: 10 Amps at 250 Volts
• Actuator: Lever, Hinge Roller
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DZ10GW21B

■ Terminals
Mounting
Use M4 mounting screws with plane washers or spring washers
to securely mount the Switch. Tighten the screws to a torque of
1.18 to 1.47 N·m.
Mounting Holes
Precautions
Refer to pages 25 to 30 of General Information for details.
■ Cautions
Terminal Connection
When soldering lead wires to the Switch, make sure that the
capacity of the soldering iron is 60 W maximum. Do not take more
than 5 s to solder any part of the Switch. Improper soldering may
cause abnormal heat radiation from the Switch and the Switch
may burn.
The characteristics of the Switch will deteriorate if a soldering iron
with a capacity of more than 60 W is applied to any part of the
Switch for 6 s or more.
Operation
Make sure that the switching frequency or speed is within the
specified range.
If the switching speed is extremely slow, the contact may not be
switched smoothly, which may result in a contact failure or contact
welding.
If the switching speed is extremely fast, switching shock may
damage the Switch soon. If the switching frequency is too high,
the contact may not catch up with the speed.
82
Solder Terminals (-1A)
Cat. No. B060-E1-07A
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Special-purpose Basic Switch
Two, 4.2 dia. mounting holes or
M4 screw holes
25.4 ± 0.1
In the interest of product improvement, specifications are subject to change without notice.
Screw Terminals (-1B)
DZ
The rated permissible switching speed and frequency indicate the
switching reliability of the Switch.
The life of a Switch is determined at the specified switching
speed. The life varies with the switching speed and frequency
even when they are within the permissible ranges. In order to
determine the life of a Switch model to be applied to a particular
use, it is best to conduct an appropriate durability test on some
samples of the model under actual conditions.
Make sure that the actuator travel does not exceed the permissi-
ble OT position. The operating stroke must be set to 70% to 100%
of the rated OT.
■ Accessories (Order
Refer to Z/A/X/DZ Common Accessories for details about Termi-
nal Covers, Separators, and Actuators.
separately)
Six M3 pan head screws
(with toothed washer)