A3SJ-5301 Omron, A3SJ-5301 Datasheet - Page 19

• Manufacturer Part Number: A3SJ-5301
• Description: PUSHBUTTON UNIT
• Manufacturer: Omron

Application
Replacing Incandescent and LED Lamps and Panel Mounting
Removing the Display
Mounting and Replacing Incandescent and LED Lamps
Inserting the Display into the Socket Unit
Insert the Operation Unit in the proper direction. With the OMRON
logo downward, insert the Operation Unit so that the lamp/LED
terminals on the inside surface of the Unit case and the contactors of
the Display.
Rated Voltage and Color of LED
The LED voltage rating is indicated on the base. Use the LED within
±5% of voltage range.
Mounting to the Switch Panel
Mount the Socket Unit to the panel by inserting it from the front of the
panel.
Mount the Socket Unit so that the OMRON logo is downward.
• Grasp the groove on the color cap surface, and pull it firmly toward
• An Extractor (A3PJ-5080) is available to conveniently remove the
you to remove the Display.
Display.
Terminals for incandescent or LED lamp
Rated voltage
Illuminating color
(color band)
OMRON logo
(built into the case)
Contactors
Barrier Mounting
Inscribing Legend Plate Characters
Inscribing
A3SJ (M2SJ)
• Place the Edge Barrier on the side of the Socket Unit, and then
• Insert the Intermediate Barrier between the Switches after inserting
• Inscription depth: 0.5 mm max.
• The legend plate is made of polycarbonate, so apply an alcohol-
• When replacing the legend plate, be careful that the coil spring in
insert it into the panel.
the Socket Units into the panel.
based paint coating, such as melamine, phthalate, or acrylic resin
paint when marking the legend.
the Display does not become removed.
Legend plate
Edge Barrier
Intermediate
Barrier
A3S
19