275 TPI (Test Products Int), 275 Datasheet - Page 2

• Manufacturer Part Number: 275
• Description: DGTL CLAMP-ON W/11,000 CNT DISP
• Manufacturer: TPI (Test Products Int)
• Series: 275r
• Type: Digital (DMM)r

Specifications of 275

• Includes: Battery, Case, Fuse, Temperature Probe, Test Leads
• Style: Clamp
• Display Digits: 4.5
• Display Type: LCD, Bar Graph
• Display Count: 11000
• Function: Voltage, Current, Resistance, Capacitance, Temperature, Frequency
• Functions, Extra: Continuity, Diode Test
• Features: Auto Off, Hold, Min/Max, Record, Voltage Indicator
• Ranging: Auto/Manual
• Response: True RMS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Test Products
International, Inc.
Headquarters:
9615 SW Allen Blvd.
Beaverton, OR 97005
USA
503-520-9197
Fax: [phone]
email:
[e-mail]
Test Products
International UK Ltd.
Longley House, East Park
Crawley, West Sussex
RH10 6AP England
Tel: [phone]
Fax: [phone]
[e-mail]
Test Products
International, Ltd.
342 Bronte St. South
Unit 9
Milton, Ontario L9T
5B7
Canada
905-693-8558
Fax: [phone]
email:
[e-mail]
TPI offers a
complete line
of…
CO, Combustibles &
Combustion (CEA)
Refrigerant Leak
Detectors
Digital Manometers
Temperature Contact
& IR Instruments
IAQ: Air Flow /
Humidity
Handheld
Oscilloscopes
Digital Multimeters
& Clamp-on Meters
Accessories & Kits
Copyright © 2004 Test Products International, Inc.
To learn about the entire
line of TPI products visit:
www.tpi-thevalueleader.com
Instrument Specifications
Basic DC Accuracy:
DC Voltage (maximum):
Resolution (maximum):
AC Voltage (maximum):
Resolution (maximum):
DC Amps (maximum):
Resolution (maximum):
DC Microamps (maximum):
Resolution (maximum):
AC Amps (maximum):
Resolution (maximum):
Resistance (maximum):
Resolution (maximum):
Frequency (maximum):
Resolution (maximum):
Capacitance (maximum):
Resolution (maximum):
Temperature (maximim):
Resolution (maximum)
Diode:
Continuity:
Agency Approval:
Overall Dimensions:
Weight:
Standard Accessories
GK11M
A085
A270
Optional Accessories
A202
A771
A620
TLS2000RB
Distributed By:
275 Clamp-On Tester General Features and Specifications
Deluxe Test Lead Kit
Test Current Max 1.5mA
Buzzer sounds at <approx. 35Ω Response time; 50ms
CEIEC 1010: CATIII; 600V
cULus 3111: pending
10” x 1.3” x 2.5” (255 x 32.5 x 65mm)
.8 lbs (363g)
Standard K-Kype Thermocouple Probe
UL Listed Silicone Test Lead Set with Alligator Clips (clip-on)
Soft Carrying Pouch
Line Splitter
Carbon Monoxide Adapter
Pressure Adapter
0.5%
600V
0.01mV
600V
0.01mV
400A
0.01A
1,100µFA
0.01µA
400A
0.01A
110MΩ
0.01Ω
110MHz
0.1Hz
110mF
0.001nF
1,000°F
0.1°F
L 275 0906
1. What is the benefit of a True RMS
meter?
A True RMS responding meter, like the
275, allows accurate measurement of
distorted AC voltage and amperage
waveforms as found in control and
switching power supply circuits.
2. How does the non-contact voltage
detection work?
This feature allows you to detect the
presence of voltage without contacting
the circuit with the test leads. By
pressing the NCV button and holding the
jaw close to the wire or circuit, the meter
will inform you both audibly and visually
if the circuit is live.
3. What is hi voltage indication?
High voltage indication is an audible and
visual safety alert informing you the test
leads are in contact with a voltage
greater than 30V AC or DC.
4. What is relative mode?
Relative mode allows you to perform
measurements relative to a stored value.
For example, when performing a low
resistance measurement, first touching
the test prods together and pressing the
relative button will subtract the lead
resistance from subsequent
measurements.
5. Is it possible to determine the
maximum current draw on a line that
has loads that vary?
By activating the min/max mode on the
275 it will record the minimum and
maximum current measured. This is
helpful when trying to see what the
maximum load draw is as devices turn
on and off.
6. Can I measure motor start up current
with the TPI 275 clamp-on tester?
Yes, the 275 has a peak hold function
that allows motor start up current to be
captured.
7. Can I test the run and start
capacitors on motors?
The 275 has the ability to measure
capacitors up to 40,000 microfarads in
size.
8. Do I need an adapter to measure
temperature with the 275?
An adapter is not needed to perform
temperature tests with the 275. The 275
accepts K-type thermocouple probes
with a sub-mini connector.
9. Is it possible to measure AC amps
on a device that uses a power cord?
Yes, to accomplish this you can use the
TPI line splitter (A202). AC amps must be
measured by isolating a single wire and
the A202 line splitter does this without
damaging the power cord.
FAQ
275