8846A 120V Fluke Electronics, 8846A 120V Datasheet - Page 63
![PREC MLTMTR 6.5 DIGI RES USB MEM](/photos/27/4/270437/8846a_dmm_sml.jpg)
8846A 120V
Manufacturer Part Number
8846A 120V
Description
PREC MLTMTR 6.5 DIGI RES USB MEM
Manufacturer
Fluke Electronics
Type
Digital (DMM)r
Specifications of 8846A 120V
Includes
Test Leads
Style
Bench
Display Digits
6.5
Display Type
VFD, Dual
Display Count
Varies
Function
Voltage, Current, Resistance, Capacitance, Temperature, Frequency
Functions, Extra
Continuity, dB, Diode Test
Features
Memory, RS-232, USB Port
Ranging
Manual
Response
Average
Lead Free Status / RoHS Status
Contains lead / RoHS compliant by exemption
Other names
2454021
614-1002
614-1002
Storing the Power-up Configuration
Recalling the Power-up Configuration
4. To store the present Meter configuration in one of the first four memory locations,
5. To adjust the display to the desired memory location, press either <-- or --> to
6. With the preferred memory location set, press the ENTER soft key to store the Meter
To store the Meter’s present configuration as a power-up configuration:
1. Press M.
2. Press the STORE CONFIG softkey.
3. Press the STORE POWER-UP softkey.
The Meter configuration stored as a power-up configuration will be set whenever the
Meter is powered on.
In addition to having the power-up configuration to set up the Meter at power on, the
power-up configuration can be recalled through the front-panel keys. To recall the power-
up configuration:
1. Press M.
2. Press the RECALL POWER-UP softkey.
3. Press the RECALL CONFIG softkey.
LAN port remote settings (address, hostname, DHCP, mask, etc.) are saved
separately when selected in each instrument, and are not included in
individually stored/copied configurations.
The RECALL POWER-UP softkey will only appear when a power-up
configuration has been saved in the Meter’s memory.
press the appropriate soft key. If you want to store the present Meter configuration in
a location other than the first four locations, press the MORE soft key.
The display indicates the next available memory location. If all configuration
memory locations are filled, the Meter will always indicate memory location 10.
select a specific digit.
With the digit selected, press the soft key labeled -- to decrement the digit or ++ to
increment the digit.
configuration.
RECALL
F1
USB
RECALL CONFIG
1.4748
INT MEM
RECALL
F2
Note
F3
Note
F4
F5
Controlling Trigger Functions
Front-Panel Operation
caw063.eps
3-21