FLUKE-83-5 Fluke Electronics, FLUKE-83-5 Datasheet - Page 43
![MULTIMETER INDUSTRIAL](/photos/27/4/270425/fluke-83-5_sml.jpg)
FLUKE-83-5
Manufacturer Part Number
FLUKE-83-5
Description
MULTIMETER INDUSTRIAL
Manufacturer
Fluke Electronics
Series
8xr
Type
Digital (DMM)r
Specifications of FLUKE-83-5
Includes
Battery, Clips, Test Leads
Style
Handheld
Display Digits
4.5
Display Type
LCD, Bar Graph
Display Count
20000
Function
Voltage, Current, Resistance, Capacitance, Frequency
Functions, Extra
Continuity, Diode Test
Features
Auto Off, Backlight, Clips, Hold, Min/Max/Ave
Ranging
Auto/Manual
Response
Average
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
2075004
614-1086
83-5
FLUKE-83-5
614-1086
83-5
FLUKE-83-5
Maintenance
General Maintenance
Periodically wipe the case with a damp cloth and mild
detergent. Do not use abrasives or solvents.
Dirt or moisture in the terminals can affect readings and
can falsely activate the Input Alert feature. Clean the
terminals as follows:
1.
2.
3.
To avoid possible electric shock or personal
injury, repairs or servicing not covered in
this manual should be performed only by
qualified personnel as described in the
80 Series V Service Information .
Turn the Meter off and remove all test leads.
Shake out any dirt that may be in the terminals.
Soak a new swab with a cleaning and oiling agent
(such as WD-40). Work the swab around in each
terminal. The oiling agent insulates the terminals
from moisture-related activation of the Input Alert
feature.
XWWarning
Fuse Test
If a test lead is plugged into the mA/ A or A terminal and
the rotary switch is turned to a non-current function, the
Meter chirps and flashes “LEAd” if the fuse associated
with that current terminal is good. If the Meter does not
chirp or flash “LEAd”, the fuse is bad and must be
replaced. Refer to Table 8 for the appropriate
replacement fuse.
To test the quality of the fuse:
before measuring current, test the appropriate fuse as
shown in Figure 10. If the tests give readings other than
those shown, have the Meter serviced.
To avoid electrical shock or personal injury,
remove the test leads and any input signals
before replacing the battery or fuses. To
prevent damage or injury, install ONLY
specified replacement fuses with the
amperage, voltage, and speed ratings shown
in Table 8.
XWWarning
Maintenance
35