CYII4SC014KAA-GWC Cypress Semiconductor Corp, CYII4SC014KAA-GWC Datasheet - Page 3
![IC SENSOR IMAGE COLOR 49-PGA](/photos/26/81/268128/pga49_sml.jpg)
CYII4SC014KAA-GWC
Manufacturer Part Number
CYII4SC014KAA-GWC
Description
IC SENSOR IMAGE COLOR 49-PGA
Manufacturer
Cypress Semiconductor Corp
Type
CMOS Imagingr
Datasheet
1.CYII4SC014K-EVAL.pdf
(27 pages)
Specifications of CYII4SC014KAA-GWC
Pixel Size
8µm x 8µm
Active Pixel Array
3048H x 4560V
Frames Per Second
3
Voltage - Supply
3.3V
Package / Case
49-PGA
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
Color Filter Array (CFA)
Figure 3. Color Filter Arrangement on the Pixels
The IBIS4-14000 can also be processed with a Bayer RGB color
pattern. Pixel (0,0) has a green filter and is situated on a
green-red row.
Figure 4
of the wavelength. Note that this response curve includes the
optical cross talk and the NIR filter of the color glass lid as well
(see
lid).
Document #: 38-05709 Rev. *D
“Cover Glass”
shows the response of the color filter array as a function
on page 24 for response of the color glass
Figure 4. Color Filter Response Curve
Output Stage
Unity gain buffers are implemented as output amplifiers. These
amplifiers can be directly DC-coupled to the analog-digital
converter or coupled to an external programmable gain amplifier.
The (dark reference) offset of the output signal is adjustable
between 1.7V and 3V. The amplifier output signal is negative
going with increasing light levels, with a max. amplitude of 1.2V
(at 4V reset voltage, in hard reset mode). The output signal range
of the output amplifiers is between 0.5V and 3V.
Notes on analog video signal and output amplifier specifications:
■
■
■
■
Video polarity: the video signal is negative going with increasing
light level.
Signal offset: the analog offset of the video signal is settable
by an external DC bias (pin 12 DARKREF). The settable range
is between 1.7V and 3V, with 2.65V being the nominal expected
set point. Hence, the output range (including 1.2V video signal)
is between 3V and 0.5V.
Power control: the output amplifiers can be switched between
an “operating” mode and a “standby” mode via the serial port
of the imager (see
ration).
Coupling: the IBIS4-14000 can be DC- or AC-coupled to the
AD converter.
“SPI Register ”
CYII4SM014KAA-GEC
CYII4SC014KAA-GTC
on page 12 for the configu-
Page 3 of 27
[+] Feedback