MTCBA-C1-EN2-N3-NAM Multi-Tech Systems, MTCBA-C1-EN2-N3-NAM Datasheet - Page 55

• Manufacturer Part Number: MTCBA-C1-EN2-N3-NAM
• Description: ROUTER WIRELESS DUAL CDMA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® rCellr

Specifications of MTCBA-C1-EN2-N3-NAM

• Function: Transceiver, CDMA, Router
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz
• Applications: Verizon™ Networks (USA)
• Interface: RJ-45, RS-232
• Features: US Power Cord
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1067

S erial-Port
3 7 B 3 8
S erial-Port > Serial Port Settings
3 8 B
Serial-Port Configuration
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Serial-Port Configuration allows for the configuration of the serial terminal connected to the RS-232 connector DE9 on the back
of the unit.
S ubmit Button
1 0 5 B 1 1 5 B
Click the Submit button to save these settings.
Baud Rate:
Flow Control:
Data Bits:
Stop Bits:
Parity:
Buffer Length:
Timeout:
Sets the baud-rate at which the serial terminal will be communicating. The default is 115200.
None.
Sets the data bits for the serial port. Data bit selection is 7 or 8. The default is 8.
Sets the stop bits for the serial port. The selections are 1 or 2. The default is 1.
Sets the parity for the serial port. The selections are None, Even, or Odd. The default is None.
Sets the length up to which the data from the serial device is buffered before IP transmission. The
default length is 32-characters.
default is 1-second.
Sets the flow control for the serial port. The selections are None or RTS-CTS. The default is
Sets the timeout value for the serial terminal of how long it should wait before IP transmission. The
Chapter 4 – Using the Web Management Software
55