MTCBA-E1-EN2 Multi-Tech Systems, MTCBA-E1-EN2 Datasheet - Page 48

• Manufacturer Part Number: MTCBA-E1-EN2
• Description: ROUTER WIRELESS QUAD E-GPRS
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® rCellr

Specifications of MTCBA-E1-EN2

• Function: Transceiver, EDGE, Router
• Modulation Or Protocol: GPRS
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RJ-45, RS-232
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1070

Chapter 4 – Using the Web Management Software
DHCP Server
6 6 B D HCP Server > Subnet Settings
9 5 B
48
General Configuration
DHCP (Dynamic Host Configuration Protocol) is a protocol that allows individual devices on an IP network to get their own
network configuration information (IP address, subnet mask, broadcast address, etc.) from a DHCP server. The overall
purpose of DHCP is to make it easier to administer a large network.
Subnet Settings
DHCP:
Subnet:
Mask:
Gateway:
DNS:
Lease Time:
Submit
From-To Range:
Add:
Note:
Enable/disable the DHCP server.
Enter the subnet address. If you want to change the DHCP subnet address, you first have to
delete all the subnet settings below.
Enter the subnet mask.
Enter the gateway address.
Enter the DNS address.
Select the DHCP Lease Time from the selection box. Lease time is set in days, hours, and
minutes. A Lease Time of 00-00-00 is an Infinite Lease Time.
Click the Submit button to save these settings.
Note:
on which you have made changes.
Enter the range of IP addresses to be assigned by DHCP.
Click the Add button. The address range is added and will display in the table at the bottom of
the screen. Once the range displays, you can delete if necessary.
See Appendix A – A Table of Commonly Supported Subnets.
You must click Save and Restart once you have completed and submitted all the screens
Multi-Tech Systems, Inc. MultiModem rCell User Guide