MTCMR-C1-N2-NAM Multi-Tech Systems, MTCMR-C1-N2-NAM Datasheet - Page 29

• Manufacturer Part Number: MTCMR-C1-N2-NAM
• Description: MODEM CELLULAR DUAL CDMA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-C1-N2-NAM

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz
• Applications: Sprint Networks (USA)
• Interface: RS-232, USB
• Data Rate - Maximum: 153.6kbps
• Features: US Power Cord
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1099

IP Setup > SNTP Configuration
General Configuration
Time Zone Configuration
Daylight Configuration
Daylight Saving Start Time
Multi-Tech Systems, Inc. MultiModem rCell User Guide
SNTP Client:
Server:
Polling Time:
Time Zone:
Time Zone Offset:
Daylight Saving:
Daylight Saving Offset:
Start Ordinal:
Start Month:
Start Day:
Start Time:
Enter the SNTP server name or IP address to which the SNTP Client must contact in order to update the
time. No default.
Enter your time zone. Default = UTC (Universal Coordinated Time, Universal Time).
See the following Web site for Time Zone information:
Time Zone.
Set the start month to use during Daylight Saving mode. Default is March.
Set the start weekday to use during Daylight Saving mode. Default is Sunday.
Enable or disable the SNTP Client to contact the configured server on the UDP port 123 and set the local
time. The default is Disable.
Enter the polling time at which the SNTP client requests the server to update the time. Default is 300
minutes. Time must be entered in minutes.
second. Daylight Saving time usually starts at the same time on the same day of the week in the same month
every year. Each day of the week occurs four or five times a month. Therefore, you will be selecting the week
in which daylight saving time starts: the first, second, third, fourth or the last of the month.
Set the start time to use during Daylight Saving mode. Default is 02:00 (hh:mm).
Set the start ordinal to use during Daylight Saving mode. Options are first/second/third/fourth/last. Default is
http://wwp.greenwichmeantime.com/info/current-time.htm
Enables/disables Daylight Saving mode. The default is Enable.
Enter +/- hh:mm. Default = +00:00. Offset is the amount of time varying from the standard time of a
Set the offset to use during Daylight Saving mode. Default is +60 minutes. Enter the time in + / -
minutes.
Chapter 4 – Using the Web Management Software
29