MTCMR-H4-P1 Multi-Tech Systems, MTCMR-H4-P1 Datasheet - Page 63

• Manufacturer Part Number: MTCMR-H4-P1
• Description: MODEM CELLULAR QUAD GPRS HSPA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-H4-P1

• Function: Transceiver, HSPA, Modem
• Modulation Or Protocol: GPRS, GSM, EDGE
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RS-232, USB
• Data Rate - Maximum: 7.2 Mbps
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1120

+CDSI Incoming SMS Status Report
+CMGC Send an SMS
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A)
Description:
Values:
Syntax:
Description:
Syntax:
Test Command:
Test Response:
Write Command:
Write Response:
Write Command:
Write Response:
This response indicates an SMS status report has been received and according to the
message storage preferences (+CNMI), is to be stored in memory.
<mem>
<index>
Response syntax: +CDSI: <mem>,<index>
Example Result
+CDSI: “SR”,5
Note: SMS status report received and stored in “SR” memory at index 5
The write command transmits a short message from TE to network (SMS-
SUBMIT).
After invoking the write command, wait for the prompt “>”, and then start to write the
message. To send the message, simply enter <CTRL-Z>. After the prompt, a timer
will be started to observe the input.
To abort sending, use <ESC>. Abortion is acknowledged with “OK”, though the
message will not be sent.
The message reference <mr> is returned to the TE on successful message delivery.
The value can be used to identify the message in a delivery status report provided
as an unsolicited result code.
AT+CMGS=?
OK
If text mode (see AT+CMGF=1)
AT+CMGS=<da>[, <toda>]
+CMGS: <mr>[, <scts>]
OK
ERROR
+CMS ERROR <err>
If PDU mode (see AT+CMGF=0)
AT+CMGS=<length>
+CMGS: <mr>[, <ackpdu>]
OK
ERROR
+CMS ERROR <err>
NVRAM storage area (always “SR” for this response)
location of message within storage area
<CR>
PDU can be entered.
<CR>
Chapter 3 – Supported GSM/WCDMA AT Commands
Text can be entered.
<CTRL-Z>/<ESC>
<CTRL-Z>/<ESC>
63