MTCMR-C1-GP-N2 Multi-Tech Systems, MTCMR-C1-GP-N2 Datasheet - Page 44

• Manufacturer Part Number: MTCMR-C1-GP-N2
• Description: MODEM CELLULAR DUAL CDMA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-C1-GP-N2

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz, 1575.42MHz
• Applications: Sprint Networks (USA)
• Interface: RS-232, USB
• Sensitivity: -161dB
• Data Rate - Maximum: 153.6kbps
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1096

Chapter 4 – Using the Web Management Software
44
3.
4.
On the
Save –
Allow Access –
External Service –
LAN IP –
Internal Service –
Pre DNAT Service –
Post DNAT IP –
Post DNAT Service –
Internal Source –
Packet Filters > DNAT Configuration
Click the Save button to save this configuration.
Note:
which you have made changes. The device will save all the settings and reboot the PC.
Select the LAN IP to which the packets are to be diverted. Only one host can be defined as the
You must click Save and Restart once you have completed and submitted all the screens on
original target network/host is the one previously defined in the Network Configuration section.
Service Configuration section.
destination.
Service Configuration section.
defined as the Post DNAT destination.
change the address, select NOCHANGE.
Example:
Example:
Example:
Example:
Example:
Select the original target network/host of the IP packets that you now want rerouted. The
Select the destination to which the IP packets are to be diverted. Only one host can be
Select the source address for packets that are going to be sent. If you do not want to
Select the Internal Service to be the destination.
Select the External Service that you want allowed. The service must be defined in the
Select the service for the Pre-DNAT destination. This service was just defined in the
Any
MeterPort
MeterIP
MeterPort
NOCHANGE
Select the service for the Post DNAT configuration.
screen, define the DNAT rule.
Multi-Tech Systems, Inc. MultiModem rCell User Guide