MTCBA-E1-U Multi-Tech Systems, MTCBA-E1-U Datasheet - Page 7

• Manufacturer Part Number: MTCBA-E1-U
• Description: MODEM CELLULAR QUAD E-GPRS
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® Cellr

Specifications of MTCBA-E1-U

• Function: Transceiver, EDGE, Modem
• Modulation Or Protocol: GPRS, GSM, EDGE
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: USB
• Sensitivity: *
• Power - Output: *
• Data Rate - Maximum: *
• Features: *
• Voltage - Supply: *
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1073

TCP/IP Address for Ethernet Functionality
Multi-Tech Systems, Inc. Quick Start Guide
Powering Down and Hardware Resetting a MTCBA-C1-EN2 Router
It is recommended to follow the following shutdown sequence, when
possible, prior to a hardware reset or turning off of power to the router.
The shutdown sequence informs the network that the mobile station is
going offline, and saves critical data to the module‘s non-volatile
memory (flash).
AT+CFUN=0 (issue this command)
+WIND:10
Router is now ready to be powered off or reset.
If you do not see the +WIND:10 response, you may need to activate
the unsolicited message by using the command
AT+WUSLMSK=00020000,0
Notes
out. Then release it. It also will set the username and password back to
admin and admin as well as setting the IP address to the default of
192.168.2.1.
The POWER LED. The POWER LED lights after power-up.
The
1.
2.
The Local Area Connection Properties dialog box displays.
●
Click Start | Settings | Control Panel. Double-click the Network
Connections icon.
The Network Connections screen displays. Right-click the Local
Area Connection icon and choose Properties from the drop down
list.
Reset Button.
●
●
Important Note:
If this screen opens and displays your current IP configuration, we
suggest you record this information for future reference (i.e., after
the router is configured, you may wish to return this PC to its
original settings).
To set a Fixed IP Address for the PC, select Use the following
IP address.
Select Internet Protocol [TCP/IP].
Click the Properties button. The Internet Protocol (TCP/IP)
Properties screen displays.
(Wait for this response from the modem)
Hold the
Reset
MultiModem rCell Intelligent Wireless Router
button in until the Status Light goes
7