MTCMR-E1 Multi-Tech Systems, MTCMR-E1 Datasheet - Page 17

• Manufacturer Part Number: MTCMR-E1
• Description: MODEM CELLULAR QUAD E-GPRS
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-E1

• Function: Transceiver, EDGE, Modem
• Modulation Or Protocol: GPRS, GSM, EDGE
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RS-232, USB
• Data Rate - Maximum: 240 kbps
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1102

Multi-Tech Systems, Inc. MultiModem rCell User Guide
4.
Important Note:
If this screen opens and displays your current IP configuration, we suggest you record this information for future
reference (i.e., after the router is configured, you may wish to return this PC to its original settings).
The Internet Protocol (TCP/IP) Properties screen.
●
To set a Fixed IP Address for the pc, select Use the following IP address.
●
Note: The x in the address stands for numbers 101 and up.
●
●
●
●
●
●
Enter the pc IP Address. Example: 192.168.2.x.
Enter the pc Subnet Mask. Example: 255.255.255.0
Enter the pc Default Gateway. Example: 192.168.2.1
Note:
Select Use the following DNS server addresses.
●
●
Close the Local Area Properties screen by clicking OK.
Close the Control Panel.
Repeat these steps for each PC on your network.
Enter the IP Address for the Preferred DNS Server. Example: 205.171.3.65
Click OK.
The factory default settings for the router are:
The pc settings must be in the same subnet range as the router.
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
Chapter 2 – Installation
17