1367337-1 TE Connectivity, 1367337-1 Datasheet - Page 3

• Manufacturer Part Number: 1367337-1
• Description: CONN RCPT 70POS RTANG .8MM SMD
• Manufacturer: TE Connectivity

Specifications of 1367337-1

• Connector Style: Receptacle
• Connector Type: PT
• Number Of Positions: 70
• Mounting Type: Surface Mount, Right Angle
• Termination: Solder
• Features: Board Guide
• Contact Finish: Gold
• Contact Finish Thickness: 15µin (0.38µm)
• Gender: Receptacle
• No. Of Contacts: 70
• Contact Termination: Surface Mount Horizontal
• Connector Mounting: PCB
• Contact Plating: Gold
• Contact Material: Phosphor Bronze
• Rohs Compliant: Yes
• Product Type: Connector
• Termination Type: Surface Mount
• Pcb Mount: Double Sided (Belly-to-Belly)
• Contact Plating, Mating Area, Material: Gold (15)
• Contact Base Material: Phosphor Bronze
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Housing Material: Liquid Crystal Polymer (LCP)
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Application: X2, XENPAK, XPAK
• Packaging Method: Reel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: A100858DKR

Rev C
Durability.
Solderability.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas.
Thermal disturbance.
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
See Note.
Solderable areas shall have a
minimum of 95% solder coverage.
See Note.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
EIA-364-9.
Manually plug and unplug
specimens for 100 cycles at a
maximum rate of 600 cycles per
hour with latch retention feature
operable.
EIA-638.
EIA-364-32.
Subject mated specimens to 10
cycles between -55 and 85° C.
EIA-364-31.
Cycle mated specimens between
25 ± 3° C at 80 ± 3% RH and 65 ±
3° C at 50 ± 3% RH. Ramp times
shall be .5 hour, dwell times shall
be 1 hour. Perform 24 such cycles.
EIA-364-17.
Subject mated specimens to 115° C
for 432 hours.
EIA-364-65.
Subject specimens to
environmental Class IIA for 14
days.
Cycle the specimens between 15 ±
3° C and 85 ± 3° C as measured on
the part. Ramps shall be a
minimum of 2° C per minute, dwell
times shall insure that the contacts
reach the temperature extremes (a
minimum of 5 minutes). Humidity is
not controlled. Perform 10 such
cycles.
Procedure
108-1949
3 of 5