KSZ8842-16MVL Micrel Inc, KSZ8842-16MVL Datasheet - Page 75

• Manufacturer Part Number: KSZ8842-16MVL
• Description: 2-Port Ethernet Switch/Repeater + Generic (8, 16-bit) Bus Interface( )
• Manufacturer: Micrel Inc

Specifications of KSZ8842-16MVL

• Controller Type: Ethernet Switch Controller
• Interface: PCI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 128-LQFP
• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1635 - BOARD EVALUATION KSZ8842-16MVL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-2119; KSZ8842-16MVL

Micrel, Inc.
Bit
7
6
5
4
3
2
1
0
October 2007
Default
1
1
1
1
0
0
0
1
R/W
RW
RW
RW
RW
RW
RW
RW
RW
Description
Unicast Port-VLAN Mismatch Discard
1 = no packets can cross the VLAN boundary.
0 = unicast packets (excluding unknown/multicast/broadcast) can cross the VLAN
boundary.
Multicast Storm Protection Disable
1 = “Broadcast Storm Protection” does not include multicast packets. Only DA =
FFFFFFFFFFFF packets are regulated.
0 = “Broadcast Storm Protection” includes DA = FFFFFFFFFFFF and DA[40] = 1
packets.
Back Pressure Mode
1 = carrier sense-based Back Pressure is selected.
0 = collision-based Back Pressure is selected.
Flow Control And Back Pressure Fair Mode
1 = fair mode is selected. In this mode, if a flow control port and a non-flow control port
talk to the same destination port, packets from the non-flow control port may be
dropped. This prevents the flow control port from being flow controlled for an extended
period of time.
0 = in this mode, if a flow control port and a non-flow control port talk to the same
destination port, the flow control port is flow controlled. This may not be “fair” to the
flow control port.
No Excessive Collision Drop
1 = the switch does not drop packets when 16 or more collisions occur.
0 = the switch drops packets when 16 or more collisions occur.
Huge Packet Support
1 = accepts packet sizes up to 1916 bytes (inclusive). This bit setting overrides setting
from bit 1 of the same register.
0 = the max packet size is determined by bit 1 of this register.
Legal Maximum Packet Size Check Enable
0 = accepts packet sizes up to 1536 bytes (inclusive).
1 = 1522 bytes for tagged packets, 1518 bytes for untagged packets. Any packets
larger than the specified value are dropped.
Priority Buffer Reserve
1 = each port is pre-allocated 48 buffers, used exclusively for high priority (q3, q2, and
q1) packets. Effective only when the multiple queue feature is turned on.
0 = each port is pre-allocated 48 buffers used for all priority packets (q3, q2,q1, and
q0).
75
KSZ8842-16/32 MQL/MVL/MVLI/MBL
M9999-102207-1.9