ADG779BKSZ-R2 Analog Devices Inc, ADG779BKSZ-R2 Datasheet - Page 7

• Manufacturer Part Number: ADG779BKSZ-R2
• Description: SINGLE SPDT In SC-70 I.C.
• Manufacturer: Analog Devices Inc
• Type: Analog Switchr

Specifications of ADG779BKSZ-R2

• Multiplexer Configuration: Single SPDT
• Number Of Inputs: 1
• Number Of Outputs: 2
• Number Of Channels: 1
• Analog Switch On Resistance: 6@3VOhm
• Analog Switch Turn On Time: 16ns
• Analog Switch Turn Off Time: 4ns
• Package Type: SC-70
• Power Supply Requirement: Single
• Single Supply Voltage (min): 1.8V
• Single Supply Voltage (typ): 3/5V
• Single Supply Voltage (max): 5.5V
• Dual Supply Voltage (min): Not RequiredV
• Dual Supply Voltage (typ): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Power Dissipation: 315mW
• Supply Current: 0.001mA
• Mounting: Surface Mount
• Pin Count: 6
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

TERMINOLOGY
V
Most positive power supply potential.
I
Positive supply current.
GND
Ground (0 V) reference.
S
Source terminal. Can be an input or an output.
D
Drain terminal. Can be an input or an output.
IN
Logic control input.
V
Analog voltage on drain (D) and source (S) terminals.
R
Ohmic resistance between the D and S.
R
Flatness is defined as the difference between the maximum and
minimum value of on resistance as measured.
ΔR
On-resistance mismatch between any two channels.
I
Source leakage current with the switch off.
I
Drain leakage current with the switch off.
I
Channel leakage current with the switch on.
V
Maximum input voltage for Logic 0.
V
Minimum input voltage for Logic 1.
I
Input current of the digital input.
C
Off switch source capacitance. Measured with reference to
ground.
DD
S
D
D
INL
ON
FLAT (ON)
S
DD
D
INL
INH
, I
(Off)
(Off)
(Off)
(V
ON
(I
S
(On)
INH
S
)
)
Rev. A | Page 7 of 12
C
Off switch drain capacitance. Measured with reference to
ground.
C
On switch capacitance. Measured with reference to ground.
C
Digital input capacitance.
t
Delay time between the 50% and 90% points of the digital input
and switch on condition.
t
Delay time between the 50% and 90% points of the digital input
and switch off condition.
t
On or off time measured between the 80% points of both
switches when switching from one to another.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during on/off switching.
Off Isolation
A measure of unwanted signal coupling through an off switch.
Crosstalk
A measure of unwanted signal that is coupled through from one
channel to another because of parasitic capacitance.
−3 dB Bandwidth
The frequency at which the output is attenuated by 3 dB.
On Response
The frequency response of the on switch.
Insertion Loss
The loss due to the on resistance of the switch.
THD + N
The ratio of harmonic amplitudes plus noise of a signal to the
fundamental.
ON
OFF
BBM
D
D
IN
, C
(Off)
S
(On)
ADG779