AD7879-1ACPZ-500R7 Analog Devices Inc, AD7879-1ACPZ-500R7 Datasheet - Page 19

• Manufacturer Part Number: AD7879-1ACPZ-500R7
• Description: Touch Screen Controller
• Manufacturer: Analog Devices Inc
• Type: Resistiver

Specifications of AD7879-1ACPZ-500R7

• Touch Panel Interface: 4-Wire
• Number Of Inputs/keys: 1 TSC
• Resolution (bits): 12 b
• Data Interface: I²C, Serial
• Data Rate/sampling Rate (sps, Bps): 105k
• Voltage Reference: External
• Voltage - Supply: 1.6 V ~ 3.6 V
• Current - Supply: 10nA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 16-LFCSP-VQ
• Voltage Supply Source: Single Supply
• Sampling Rate (per Second): 105k
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: AD7879-1ACPZ-500R7TR

GPIO Interrupt Enable (Bit 12, Control Register 3,
Address 0x03)
The GPIO pin can operate as an interrupt source to trigger the
INT output. This is controlled by Bit 12 in Control Register 3.
If the GPIO ALERT interrupt enable bit is set to 0, the GPIO can
trigger INT . If this bit is set to 1, the GPIO cannot trigger INT .
Rev. C | Page 19 of 40
INT is asserted if the GPIO data register bit is set when the
GPIO is configured as an input, provided that INT is enabled.
INT is triggered only when the GPIO is configured as an input,
that is, when GPIO DIR = 1.
INT is cleared only when the GPIO signal or the GPIO enable
bit changes.
AD7879/AD7889