24LC014-I/MC Microchip Technology, 24LC014-I/MC Datasheet - Page 10

• Manufacturer Part Number: 24LC014-I/MC
• Description: 1K, 128 X 8 SERIAL EE, 2.5V IND 8 DFN 2X3mm TUBE
• Manufacturer: Microchip Technology

Specifications of 24LC014-I/MC

• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Memory Size: 1K (128 x 8)
• Speed: 400kHz
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 2.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

24AA014/24LC014
7.0
Since the device will not acknowledge during a write
cycle, this can be used to determine when the cycle is
complete (this feature can be used to maximize bus
throughput). Once the Stop condition for a write
command has been issued from the master, the device
initiates the internally-timed write cycle and ACK polling
can be initiated immediately. This involves the master
sending a Start condition followed by the control byte
for a Write command (R/W = 0). If the device is still
busy with the write cycle, no ACK will be returned. If no
ACK is returned, the Start bit and control byte must be
re-sent. If the cycle is complete, the device will return
the ACK and the master can then proceed with the next
Read or Write command. See
diagram of this operation.
DS21809G-page 10
ACKNOWLEDGE POLLING
Figure 7-1
for a flow
FIGURE 7-1:
Initiate Write Cycle
Send Control Byte
Write Command
with R/W = 0
Acknowledge
Condition to
Send Stop
(ACK = 0)?
Send Start
Did Device
Operation
Send
Next
ACKNOWLEDGE POLLING
FLOW
 2010 Microchip Technology Inc.
Yes
No