MDP16032K70GE04 Vishay, MDP16032K70GE04 Datasheet - Page 4

• Manufacturer Part Number: MDP16032K70GE04
• Description: MDP16-03 2.7K 2% E04 E1
• Manufacturer: Vishay
• Series: MDPr
• Type: Networkr

Specifications of MDP16032K70GE04

• Resistance (ohms): 2.7K
• Number Of Resistors: 8
• Circuit Type: Isolated
• Temperature Coefficient: ±100ppm/°C
• Tolerance: ±2%
• Power Per Element: 250mW
• Number Of Pins: 16
• Package / Case: 16-DIP (0.300", 7.62mm)
• Size / Dimension: 0.850" L x 0.310" W (21.59mm x 7.87mm)
• Height: 0.120" (3.05mm)
• Mounting Type: Through Hole
• Operating Temperature: -55°C ~ 125°C
• Technology: Thick Film
• Resistance: 2.7kohm
• Power Rating: 1.92W
• Power Rating Per Resistor: 1/4W
• Tolerance (+ Or -): 2%
• Circuit Designator: ISOL
• Mounting Style: Through Hole
• Military Standard: Not Required
• Operating Temp Range: -55C to 125C
• No. Of Terminals: 16
• Case Style: Molded
• Failure Rate: Not Required
• Termination Style: Pin
• Terminal Pitch: 2.54
• Product Length (mm): 21.59mm
• Product Depth (mm): 7.87mm
• Product Height (mm): 3.81mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MDP 01, 03, 05
Vishay Dale
www.vishay.com
4
PERFORMANCE
TEST
Power Conditioning
Thermal Shock
Short Time Overload
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
Shock
Vibration
Load Life
Terminal Strength
Insulation Resistance
Dielectric Withstanding Voltage
1000 h at + 70 °C, rated power applied 1.5 h “ON, 0.5 h “OFF” for full 1000 h
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
Leads immersed in + 350 °C solder to within 1/16" of device body for 3 s
For technical questions, contact:
1.5 rated power, applied 1.5 h “ON” and 0.5 h “OFF” for 100 h
12 h at maximum of 20 g's between 10 Hz and 2000 Hz
240 h with humidity ranging from 80 % RH to 98 % RH
No evidence of arcing or damage (200 V
45 min at full rated working voltage at - 65 °C
period. Derated according to the curve.
5 cycles between - 65 °C and + 125 °C
± 4 h at + 25 °C ambient temperature
2.5 x rated working voltage 5 s
Total of 18 shocks at 100 g's
4.5 pound pull for 30 s
10 000 MΩ (minimum)
CONDITIONS
[e-mail]
RMS
for 1 min)
(TYPICAL TEST LOTS)
Document Number: 31511
± 0.50 % ΔR
± 0.50 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 0.50 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 0.25 % ΔR
± 1.00 % ΔR
± 0.25 % ΔR
Revision: 07-Jun-10
MAX. ΔR
-
-