X2-A11-E-W Digi International, X2-A11-E-W Datasheet - Page 3

Zigbee / 802.15.4 Modules & Development Tools ConnectPort X2 ZigBee to Ethernet

X2-A11-E-W

Manufacturer Part Number
X2-A11-E-W
Description
Zigbee / 802.15.4 Modules & Development Tools ConnectPort X2 ZigBee to Ethernet
Manufacturer
Digi International
Datasheet

Specifications of X2-A11-E-W

Interface Type
Ethernet
Modulation
CCK, DBPSK, DQPSK
Security
NAT
Operating Voltage
12 V
Antenna
RPSMA
Operating Temperature Range
- 30 C to + 70 C
For Use With/related Products
NS7520
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Wi-Fi (802.11b/g)
Frequency
Data Rate
Modulation
Transmit Power
Receiver Sensitivity
Connector
Modes
Power Requirements
Power Input
Power Supply
Power Consumption
Surge Protection (with included power supply)
Environmental
Operating Temperature
Relative Humidity
Ethernet Isolation
Serial Port Protection (ESD)
Regulatory Approvals
Specifications
Safety
Emissions/Immunity
Mobile Certifications - CDMA/EV-DO
Mobile Certifications - GSM/UMTS
+15 kV Air Gap and +8 kV contact discharge per IEC 1000-4-2
DBPSK (1 Mbps), DQPSK (2 Mbps), CCK (11,5.5 Mbps),
PTCRB, NAPRD.03, GCF-CC, R&TTE, EN 301 511
16-QAM (24,36 Mbps), 64-QAM (48, 54 Mbps)
Up to 54 Mbps with automatic rate fallback
-71 dBm @ 54 Mbps; -81 dBm @ 11 Mbps;
CE, FCC Part 15 (Class A), AS/NZS CISPR 22,
UL 60950, CSA 22.2 No. 60950, EN60950
-88 dBm @ 6 Mbps; -93 dBm @ 1 Mbps
BPSK (6,9 Mbps), QPSK (12,18 Mbps),
CDG, TIA/EIA-690, TIA/EIA-98-E
ConnectPort® X4
12VDC power supply for 0° C to 60° C (32° F to 140° F) with locking barrel connector included;
EN55024, EN55022, Class A
Idle: 1.5 W, Max: 10.4 W
15 dBm ± 2 dBm
6-30VDC
Ad-hoc & AP Client Modes only; Access Point Mode not supported
extended temperature power supply available separately
4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4
1500VAC min per IEEE802.3/ANSI X3.263
-30° C to +70° C (-22° F to +158° F)
5% to 95% (non-condensing)
1 x RP-SMA
2.4 GHz
DBPSK (1 Mbps), DQPSK (2 Mbps),
ConnectPort® X2
Up to 11 Mbps w/fallback
CE, FCC Part 15 (Class A)
Idle: 1.2 W, Max: 3.4 W
-82 dBm @ 11 Mbps
CCK (11,5.5 Mbps)
16 dBm typical
EN60950
9-30VDC
N/A
N/A
N/A

Related parts for X2-A11-E-W