V23993-A1037-A VINCOTECH, V23993-A1037-A Datasheet - Page 14

• Manufacturer Part Number: V23993-A1037-A
• Description: GPS Modules & Development Tools GPS Receiver Module Full NMEA (SMD)
• Manufacturer: VINCOTECH
• Type: GPS Moduler

Specifications of V23993-A1037-A

• Operating Voltage: 3.3 V to 3.6 V
• Frequency Range: 1575 MHz
• Operating Temperature Range: - 30 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3 Proprietary Sentences
3.1 Introduction
Device manufacturer define extensions of the standard NMEA protocol or
sentences thereof.
3.2 NMEA Sentence Handling and Baud Rate Set-up
The following commands handle the configuration of NMEA outputs.
$PSTMNMEACONFIG,<NMEACONCODE>
Arguments:
Description:
See also:
Message list:
The message list is the sum of the IDs of each message included to the list.
Example: to have GSA and GSV output messages the message list must be 12.
Page 14 of 43
• The general format is:
• The combination of <vendor><message> is called address field.
• The general format of the address field (vendor + message identifier) is:
• $PSTMNMEAONOFF: Toggle NMEA sentences
• $PSTMRMC: Toggle RMC sentence
”$<vendor><message><parameters><CR><LF>”.
Note that a checksum is NOT required!
”P<manufacturer code><message code> with “P” for proprietary”.
NMEACONCODE
This command configures baud rate, message list and transmit mode of NMEA
output sentences.
No response!
---
Table 6: NMEA sentences update part 1
GPS Receiver Firmware
Code for NMEA output sentences configuration, syntax:
0,xxxxxxx,yyyy,z
xxxxxxx
yyyy
z
User’s Manual
A1037
UART baud rate
Output message list (see below)
0 to transmit on UTC second
1 to transmit after FIX
Configures NMEA
V2.0 - 04/07