PIXIE-SLLF-DIL Flexipanel, PIXIE-SLLF-DIL Datasheet - Page 6

• Manufacturer Part Number: PIXIE-SLLF-DIL
• Description: Zigbee / 802.15.4 Modules & Development Tools PixieMAC Fast End Device DIL
• Manufacturer: Flexipanel

Specifications of PIXIE-SLLF-DIL

• Wireless Frequency: 2.4 GHz to 2.5 GHz
• Modulation: DSSS OQPSK
• Output Power: 1 mW
• Antenna: G-Antenna
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

If the coordinator is operating in Star mode, it can cache some data for sleeping devices. While
awake, sleepy devices poll the coordinator to see if it has data. A high PollRate provides lower
latency but requires higher power. Data in the cache will be discarded if it is not polled for within a
duration of PersistenceTime. (Refer to the PollRate and PersistenceTime in the device configuration
section.)
Device Configuration
In the device configuration mode, various non-volatile settings may be selected. To enter the Device
Configuration mode, press and hold the Bind button for 5 seconds until the LED begins to flash
rapidly. An ‘>’ ASCII character will be output from TxD at 9600 baud.
Entering device configuration mode will also erase network information.
coordinator, it will erase its list of children; if it is an end device, it will mark itself as an orphan,
ready to join a new network.
Once in the Device Configuration mode, configuration data is sent at 9600 baud to the RxD pin.
Flow control is ignored. 27 characters should be sent, and they are interpreted as follows:
Page 6
14-Jan-08
Byte(s)
12-27
1-4
10
11
5
6
7
8
9
MAC address
ReleaseTime
PersistTime
TaskOnFail
Erase Lock
Addressing
Baud rate
PollRate
StarLite DS505-4
Setting
Key
Description
Must be 0x23, 0x47, 0x5E, 0x3D (i.e. ASCII “#G^9”). If it is not,
device configuration is aborted
0x55 (‘U’) if network information should be in future erased
0x4C (‘L’) if network information should be in future erased only if
0x42 (‘B’) for Broadcast mode*
0x53 (‘S’) for Star mode
0x41 (‘A’) for Addressed mode
0x39 (‘9’) for 9600 baud*
0x32 (‘2’) for 19200 baud
0x33 (‘3’) for 38400 baud
0x35 (‘5’) for 57600 baud
0x31 (‘1’) for 115200 baud
(Note: device configuration is always 9600 baud)
0x31 (‘1’) for 250ms poll rate
0x32 (‘2’) for 500ms poll rate
0x33 (‘3’) for 1s poll rate*
0x34 (‘4’) for 2s poll rate
0x35 (‘5’) for 5s poll rate
0x36 (‘6’) for 15s poll rate
0x37 (‘7’) for 60s poll rate
0x31 (‘1’) for 1s persist time
0x32 (‘2’) for 10s persist time
0x33 (‘3’) for 60s persist time*
0x34 (‘4’) for 1hr persist time
0x31 (‘1’) for 1ms release time
0x32 (‘2’) for 3ms release time
0x33 (‘3’) for 10ms release time*
0x34 (‘4’) for 30ms release time
0x35 (‘5’) for 100ms release time
0x43 (‘C’) carry on regardless if network error occurs
0x52 (‘R’) reset if network error occurs*
0x53 (‘S’) sleep if network error occurs & reset if woken up
MAC address as 16 hex digits 0-F. Ignored if address already valid.
immediately entering configuration mode*
Key is correctly input
FlexiPanel Ltd
Patents may apply and/or pending
* = default value
If the device is a
www.FlexiPanel.com