SX-550-0700 Silex Technology, SX-550-0700 Datasheet - Page 80

WiFi / 802.11 Modules & Development Tools Wired Internal OEM 10/100 Serial Server

SX-550-0700

Manufacturer Part Number
SX-550-0700
Description
WiFi / 802.11 Modules & Development Tools Wired Internal OEM 10/100 Serial Server
Manufacturer
Silex Technology
Datasheet

Specifications of SX-550-0700

Interface Type
RS-232, SPI
Security
802.1x
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Echo control
Disconnect
Return to data mode
Quiet mode
Verbose mode
Console pass through
Console Quiet mode
Part Number 40183-101
Parameter
Parameter
Table 30 Extended AT Commands
ATEn
ATHn
ATOn
ATQn
ATVn
AT#C<string>
AT#Qn
Command
Command
Silex SX-550 Developer's Guide
If n=0, commands are not echoed.
If n=1, subsequent commands will be echoed.
The default, upon unit reset, is for no echo (ATE0).
If n=0, any connection to a remote host is dropped.
Other value of n is ignored.
Exits command mode and places the serial port in the
data mode.
All subsequent data is sent to the network
application, if connected, until an enter command
mode sequence is received. Any value of n is
ignored, if present.
If n = 1, no result codes are returned.
If n = 0, result codes are returned to the local device.
0 is the reset default value.
If n = 0 and not in quiet mode, result codes are
returned in numerical form.
If n = 1, results are returned as text. 1 is the reset
default value.
Passes the string to the server configuration console.
The string can be any valid console command. Refer
to your server documentation for console commands
available on your unit.
Since this command does not follow the normal AT
command format of <command><number>, it must
be the last command on the line unless the next
command is a '#' command. All characters up to the
end of line or a '# will be considered part of the
console command.
If console quiet mode is not is enabled, then the
response will be the standard console task response.
Example:
If n = 0, a response to a #C command is given.
after reset is 1.
If n = 1, the response is not provided. The default
AT#Cset nw ssid silex#Csave
Description
Description
Page 72

Related parts for SX-550-0700