G6D-1A-ASIDC21BYOMB Omron, G6D-1A-ASIDC21BYOMB Datasheet - Page 4

• Manufacturer Part Number: G6D-1A-ASIDC21BYOMB
• Description: RELAY POWER PCB
• Manufacturer: Omron
• Series: G6D-ASIr

Specifications of G6D-1A-ASIDC21BYOMB

• Contact Form: SPST-NO (1 Form A)
• Contact Rating (current): 5A
• Switching Voltage: 250VAC, 30VDC - Max
• Turn On Voltage (max): 14.7 VDC
• Turn Off Voltage (min): 2.1 VDC
• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 9.5mA
• Coil Voltage: 21VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: G6D1AASIDC21BYOMB

■ Approvals
• The rated values approved by each of the safety standards may be different from the performance characteristics individually defined in this catalog.
UL Recognized
CSA Certified
EN/TÜV Approval
Note: 1. The rated values approved by each of the safety standards (e.g., UL, CSA, TUV) may be different from the performance characteristics
Precautions
■ Spacing Between Relays
More than two relays can be closely mounted right side up as shown
in the illustration below.
More than two relays can be closely mounted upside down as shown
in the illustration below.
Note: The space between each relay required for heat radiation may
130
G6D-1A-ASI
G6D-1A-ASI
G6D-1A-ASI
2. In the interest of product improvement, specifications are subject to change.
vary with operating conditions.
individually defined in this catalog.
Model
Model
Model
Power PCB Relay
7.62 mm in the
upside-down
direction
6.5 mm
(File No. LR31928)
(File No. E41515) - - Ambient Temp. = 40°C
1.12 mm
(Registration No. R50029064/EN61810-1)
1
1
1
Number of poles
Number of poles
Number of poles
Current flow:
5 A max.
Current flow:
2 A max.
G6D-ASI
5 to 24 VDC
5 to 24 VDC
5, 12, 24 VDC
Coil ratings
Coil ratings
Coil ratings
■ Socket Mounting
When mounting the relay, insert it into the socket as vertically as pos-
sible so that the relay terminals contact securely with the contact pins
on the socket.
The P6D-04P socket is flux-resistant. Do not wash the socket with
water.
Remove the relay from the socket before soldering the socket to a
PC board.
Mounting height
5 A, 250 VAC
5 A, 30 VDC
5 A, 250 VAC (General Use)
5 A, 30 VDC (Resistive)
5 A, 250 VAC (cosφ=1.0)
5 A, 30 VDC (0 ms)
Contact ratings
Contact ratings
Contact ratings
18.5 mm max.
6,000
6,000
70,000
Number of test
Number of test
Number of test
operations
operations
operations