CY3265O-RGB Cypress Semiconductor Corp, CY3265O-RGB Datasheet - Page 5

• Manufacturer Part Number: CY3265O-RGB
• Description: EVAULATION KIT EZ-COLOR
• Manufacturer: Cypress Semiconductor Corp
• Series: EZ-Color™r

Specifications of CY3265O-RGB

• Main Purpose: Lighting, LED Light Engine, RGB
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CY8CLEDxx
• Kit Contents: CY3265O-RGB Evaluation Board, Blue PCA Enclosure/Case, 12V 1A Power Supply, Retractable USB Cable
• Development Tool Type: Evaluation Board
• Kit Contents Descriptive: Evaluation Board, Tools
• Core Chip: CY3265
• No. Of Outputs: 1
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Primary Attributes: -
• Secondary Attributes: -
• Lead Free Status / Rohs Status: Compliant

1.1
1.2
1.2.1
1.2.2
CY3265-RGB Evaluation Kit Guide, Doc. # 001-46025 Rev. **
1.
Introduction
Purpose
The CY3265-RGB Evaluation Kit demonstrates the ability of an EZ-Color controller to control three
primary, high brightness LEDs and create accurate, mixed-color output. The three LEDs in the
CY3265 evaluation unit use the primary colors red, green, and blue, although any three primary
color LEDs can be used in a design, depending upon the application and the desired color gamut.
Right out of the box, CY3265-RGB Evaluation kit can be used to evaluate and demonstrate EZ-Color
functionality, including color mixing. See the quick start on how to use the kit with the factory installed
firmware.
This guide serves two main purposes:
1.
2.
3.
Install Software
Install the CY3265-RGB Kit Software
1. Insert the CY3265-RGB Kit CD.
2. Open Intelligent Lighting Control.msi.
3. Follow the Setup Wizard instructions.
Install the Latest Version of PSoC Programmer
To ensure you have the latest version of PSoC Programmer:
1. Launch PSoC Programmer.
2. Select Help → About PSoC Programmer.
3. Note the version number and click OK.
Chapter 1. Introduction‚ on page 5
Chapter 2. Application Guide‚ on page 9
Chapter 3. Color Accuracy‚ on page 17
nates, and Building RGB Firmware.
WARNING: HIGH BRIGHTNESS LEDs CAN CAUSE PERMANENT
EYE DAMAGE!
Do not look at the LEDs if they are not covered by the protective
enclosure. The LEDs illuminate at a very high intensity and can
cause permanent eye damage if they are viewed without the
protective enclosure.
discusses kit contents, installation instructions, and MiniProg.
discusses the Intelligent Lighting Control application.
discusses the Color Accuracy, Primary Color Coordi-
5