CY3265O-RGB Cypress Semiconductor Corp, CY3265O-RGB Datasheet - Page 5

• Manufacturer Part Number: CY3265O-RGB
• Description: EVAULATION KIT EZ-COLOR
• Manufacturer: Cypress Semiconductor Corp
• Series: EZ-Color™r

Specifications of CY3265O-RGB

• Main Purpose: Lighting, LED Light Engine, RGB
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CY8CLEDxx
• Kit Contents: CY3265O-RGB Evaluation Board, Blue PCA Enclosure/Case, 12V 1A Power Supply, Retractable USB Cable
• Development Tool Type: Evaluation Board
• Kit Contents Descriptive: Evaluation Board, Tools
• Core Chip: CY3265
• No. Of Outputs: 1
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Primary Attributes: -
• Secondary Attributes: -
• Lead Free Status / Rohs Status: Compliant

Setup the CY3265-RGB Kit
4.1.
4.2.
4.3.
4.4.
4.5.
4.6.
4.7.
Use the Intelligent Lighting Control Application
4.8.
4.9.
4.10. In CIE Color Selection Mode tab, click anywhere within the color gamut triangle to select
4.11.
4.12. To enable the black body curve in the CIE color chart, select the Enable check box in the
4.13. Use the color temperature slider to select the color temperature value in Kelvin.
4.14. If you want to display colors by using sliders instead of the color chart, click the Direct LED
4.15. In the Direct LED Control Mode tab, move any of the three sliders from bottom to top to light
4.16. To exit the application, click on the Windows close box icon ‘x’ in the upper right corner of the
Power the CY3265-RGB unit using the provided AC power adapter.
Press the On/Off button and notice that the translucent viewing cube lights.
Press the Color button to cycle through the preset colors.
Plug the USB cable into the side of the case and also into a USB port on the PC.
If a popup window appears asking to install a driver, follow the steps labeled Recommended.
Open the Intelligent Lighting Control application. This stand alone Intelligent Lighting Control
enables you to adjust various settings on the CY3265-RGB Evaluation unit.
Ensure the unit is recognized by the Intelligent Lighting Control application by observing the
status message field located in the bottom left portion of the window.
Click the On button, displayed on the bottom part of the right-hand pane of the Intelligent
Lighting Control application. If the currently selected color coordinate is within the color
gamut for the LEDs, the LEDs illuminate.
Observe that the Intelligent Lighting Control application window opens with CIE Color Selec-
tion Mode.
the corresponding CIE coordinates. The selected coordinates are displayed in the CIE Coor-
dinates panel on the upper right corner of the window and are also transmitted to the board.
Use the Requested Luminous Flux slider to vary the luminous flux of the mixed color out-
put.
Color Temperature Control panel. Note that enabling the color temperature control disables
the controls used to specify mixed color CIE color chart.
Control Mode tab.
the corresponding LED from zero to 100 percent. Note that when you enable direct LED con-
trol mode, all controls that relate to mixing colors are disabled.
application window.
5