PE30 AL 1K 10% A BO Vishay, PE30 AL 1K 10% A BO Datasheet - Page 2

• Manufacturer Part Number: PE30 AL 1K 10% A BO
• Manufacturer: Vishay

Specifications of PE30 AL 1K 10% A BO

• Lead Free Status / RoHS Status: Supplier Unconfirmed

www.vishay.com
132
PE30
Vishay Sfernice
SPECIAL FEATURES
COMMAND SHAFT
Length is measured from the mounting surface to the free
end of the shaft. The screwdriver slot is aligned with the
wiper within ±10°. Special shafts are available, in
accordance to drawings supplied by customers. We
recommend that customers should not machine shafts, in
order to avoid damage. Bending or torsion of terminals
should also be avoided.
PANEL SEALING: PE30P
The panel sealing device consists of a ring located in a slot
on the potentiometer face. Sealing is obtained by tightening
the ring against the panel when mounting the potentiometer.
LINEARITY
The typical linearity of linear variation law potentiometers is
±5%. Guaranteed linearity on request. Consult VISHAY.
MECHANICAL SPECIFICATIONS
Mechanical Travel
Operating Torque (max. Ncm)
End Stop Torque (max. Ncm)
Max Tightening Torque
of Mounting Nut (Ncm)
Unit Weight (max. g)
POWER RATING CHART
ELECTRICAL SPECIFICATIONS
Resistive Element
Electrical Travel
Resistance Range
Standard series E3
Tolerance
Power Rating
Temperature Coefficient
Limiting Element Voltage (Linear Law)
Contact Resistance Variation
End Resistance (Typical)
Dielectric Strength (RMS)
Insulation Resistance (500VDC)
0.5
1
0
0
20
AMBIENT TEMPERATURE IN DEGREES CELSIUS
LIN. LAW “A”
LOG. LAWS “L & F”
40
60
70
Fully Sealed Container Cermet Potentiometers
Linear Law
Logarithmic Laws
Standard
On Request
Linear
Logarithmic
80
300° ± 5°
3 typical
70
250
23 to 32
100
For technical questions, contact: [e-mail]
Military and Professional Grade
125
140
SHAFT LOCKING: DBAN
The shaft locking device consists of a tapered nut tightening
a slotted notched washer against both bushing and shaft.
DBAN tightening torque is 200 Ncm, shaft locking torque
being 30 Ncm.
DBAN is also available with all special types.
This device is normally supplied in a separate bag. Can be
pre-mounted on request.
LOCATING PEG: LPRP
Location is obtained by fitting a special washer in 2 holes
drilled at 180° in the potentiometer face.
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
Climatic Category
Sealing
RESISTANCE LAWS
See Standard Resistance Element Data
100
1 - 2.2 - 4.7 and on request 1 - 2 - 5
80
60
40
20
0
0
100 to 2.2M
1.5W at + 70°C
22 to 10M
± 10% - ± 5%
3W at + 70°C
3% Rn or 3
20
270° ± 10°
cermet
10
2500V
± 20%
300V
1
6
M
% CLOCKWISE SHAFT ROTATION
F
40
A
60
– 55°C to + 125°C
55 / 125 / 56
fully sealed
container IP67
Document Number: 51037
L
Revision: 05-Aug-04
80
100