HL03509Z10R00JJ Vishay, HL03509Z10R00JJ Datasheet - Page 3

• Manufacturer Part Number: HL03509Z10R00JJ
• Description: HL-35-09Z 10 5% J01
• Manufacturer: Vishay
• Type: Wirewoundr

Specifications of HL03509Z10R00JJ

• Power Rating(s): 40W
• Resistance: 10Ohm
• Tolerance (+ Or -): 5%
• Temperature Coefficient: ±30
• Mounting Style: Bolt-On
• Construction: Tubular
• Package / Case: Flat
• Operating Temp Range: -55C to 350C
• Case Style: Ceramic Hi Temp Sil
• Termination Style: Radial Lug
• Military Standard: Not Required
• Failure Rate: Not Required
• Product Length (mm): 82.55mm
• Product Height (mm): 14.29mm
• Product Depth (mm): 14.29mm
• Tolerance: 5 %
• Power Rating: 35 Watts
• Product: Power Resistors Wire Wound Silicon Coated
• Lead Free Status / RoHS Status: Not Compliant
• Lead Free Status / RoHS Status: Not Compliant

HL, NHL FLAT and HLM, NHLM
Vishay Dale
POWER RATING
Vishay HL flat and HLM resistor wattage ratings are
based on mounting horizontally to 10" x 10" x 0.04"
[254.0 mm x 254.0 mm x 1.02 mm] steel plate in 25 °C
ambient with no air flow.
MATERIAL SPECIFICATIONS
Element: Copper-nickel alloy of nickel-chrome alloy,
depending on resistance value
Core: Ceramic, steatite
Coating: Special high temperature silicone
Standard Terminals: Model “Z” terminals are tinned steel
Terminal Bands: Steel
Part Marking: DALE, model, wattage, value, tolerance, date
code
www.vishay.com
74
TECHNICAL SPECIFICATIONS
PARAMETER
Temperature Coefficient
Dielectric Withstanding Voltage
Short Time Overload
Maximum Working Voltage
Insulation Resistance
Operating Temperature Range
ppm/°C
Industrial Power, Flat (HL), Miniature Flat (HLM)
UNIT
V
°C
Ω
V
AC
-
For technical questions, contact: [e-mail]
Wirewound Resistors,
± 90 for 0.1 Ω to 0.99 Ω; ± 50 for 1 Ω to 9.9 Ω; ± 30 for 10 Ω and above
1000 MΩ minimum dry, 100 MΩ minimum after moisture test
HL, HLM RESISTOR CHARACTERISTICS
1000, from terminal to mounting hardware
EXCLUSIVE BRACKET DESIGN
Mounting strap fits snugly through resistor core and is
bound against unit by two eccentric spacers. The bracket
eliminates expensive cements and improves heat transfer
and power handling capabilities.
NHL, NHLM NON-INDUCTIVE
Models of equivalent physical and electrical specifications
are available with non-inductive (Aryton-Perry) winding.
They are identified by adding the letter N to the front of the
HL and HLM type designation (NHLM020, for example). For
NHL and NHLM models maximum resistance values are
lower, see STANDARD ELECTRICAL SPECIFICATIONS
table.
10 x rated power for 5 s
- 55 to + 350
(P x R)
1/2
Document Number: 30209
Revision: 13-Jul-07