Technical specifications
Maximum continuous operating voltage:
Operating frequency:
Rated currents:
Approvals by rated current:
High potential test voltage:
Protection category:
Temperature range (operation and storage):
Design corresponding to:
Flammability corresponding to:
MTBF @ 40°C/230V (Mil-HB-217F):
The FN 9244 IEC inlet filter combines an
IEC inlet and mains filter with superior
filter attenuation in a small form factor.
Choosing the FN 9244 product line brings
you the rapid availability of a standard
filter associated with the necessary safety
acceptances. Standard IEC connector
filters are a practical solution helping you
to pass EMI system approval in a short
time. A wide selection on amperage ratings,
output connections, mounting possibili-
ties and filters for medical applications are
designed to offer you the desired solution.
Excellent performance IEC inlet fi lter
■
■
■
■
■
■
250VAC, 50/60Hz
dc to 400Hz
1 to 15A @ 50°C
1 to 10A (ENEC, CQC)
1 to 15A (UL, CSA)
P –> E 2000VAC for 2 sec (standard types)
P –> E 2500VAC for 2 sec (B types)
P –> N 1000VAC for 2 sec
IP40 according to IEC 60529
-25°C to +85°C (25/85/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
UL 94V-2 or better
≤8A: 2,035,000 hours
≤15A: 1,035,000 hours
Features and benefits
■
■
■
■
■
■
Rated currents up to 15A
Superior attenuation performance
Optional earth line choke
Optional medical versions (B type)
Snap-in versions (S and S1 type)
Hot inlet versions (HI type)
Exceptional conducted attenuation
performance, based on chokes with high
saturation resistance and excellent thermal
behavior.
Rear/front or snap-in mounting.
Standard or wide mounting flange.
Optional medical versions (B type)
according to IEC/EN 60601-1.
Optional earth line choke see FN 9244E
data sheet.
Custom-specific versions are available on
request.
IEC inlet fi lters
FN 9244
Approvals
(CQC approval pending)
Typical electrical schematic
N
E
P
Typical applications
■
■
■
■
■
■
■
Line
Portable electrical and electronic
equipment
Small to medium-sized machines and
household equipment
Single-phase power supplies, switch-mode
power supplies
Test and measurement equipment
Medical devices (MDD)
In-vitro diagnostic medical devices (IVDD)
Rack mounting equipment
Cx
R
2xL
2xCy
Load
N‘
E‘
P‘