MAX4206EVKIT Maxim Integrated Products, MAX4206EVKIT Datasheet - Page 3

• Manufacturer Part Number: MAX4206EVKIT
• Description: Amplifier Modules & Development Tools MAX4206 EVAL KIT MAX4206 EVAL KIT
• Manufacturer: Maxim Integrated Products

Specifications of MAX4206EVKIT

• Product: Amplifier Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Table 2. Setting Output Scale Factor for MAX4206 (Single-Supply Operation)
Table 3. Setting Output Scale Factor for MAX4206 (Dual-Supply Operation)/MAX4207
The EV kit incorporates jumpers JU2 and JU4–JU7 to set
the output scale factor. See Tables 2 and 3 for setting the
output scale factor for the MAX4206 and MAX4207.
Jumper JU8 controls the REFIIN pin of the MAX4206/
MAX4207 device. See
The EV kit incorporates jumper JU11 to create a con-
nection between CMVIN and CMVOUT pins. To set the
common-mode voltage input to a voltage other than
0.5V (MAX4206) or 0V (MAX4207), remove the shunt
across JU11, and then connect a desired common-
mode voltage on the CMVIN pad.
To adjust the output offset voltage for single-supply
operation, cut open the short on R14, install a resistor
on the R14 pads, and then apply a current on the
OSADJ pad. The value of R14 can be calculated by the
following equation:
where V
a user-supplied offset current.
SCALE FACTOR
SCALE FACTOR
(V/decade)
(V/decade)
0.25
0.50
0.75
1.00
1.25
0.25
0.50
0.75
1.00
OS
is the desired offset voltage, and I
R14 = V
_______________________________________________________________________________________
Table
Output Offset (MAX4206)
JU2 SHUNT
Not installed
Not installed
Not installed
Not installed
Not installed
Not installed
JU2 SHUNT
Pins 2 and 3
Pins 2 and 3
Pins 2 and 3
Pins 2 and 3
Pins 2 and 3
POSITION
POSITION
OS
4 for JU8 function.
/ I
OSADJ
JU4 SHUNT
Pins 1 and 2
Pins 1 and 3
Pins 1 and 2
Pins 1 and 3
Pins 1 and 4
Pins 1 and 4
JU4 SHUNT
Pins 1 and 3
Pins 1 and 2
Pins 1 and 3
Pins 1 and 4
Pins 1 and 4
POSITION
POSITION
OSADJ
is
MAX4206 Evaluation Kit
To evaluate the MAX4207 with the MAX4206 EV kit,
replace the MAX4206ETE with a MAX4207ETE, replace
R1, R2, C7, and C8 with component values 330Ω,
330Ω, 33pF, and 33pF, respectively.
Jumper JU1 must be open to ensure proper operation
with dual supplies.
Table 4. JU8 Function
Pins 1 and 2
Pins 2 and 3
JU8 SHUNT
JU5 SHUNT
Pins 2 and 3
Pins 2 and 3
Pins 1 and 2
Pins 1 and 2
Pins 2 and 3
Pins 1 and 2
JU5 SHUNT
Pins 2 and 3
Pins 1 and 2
Pins 1 and 2
Pins 2 and 3
Pins 1 and 2
POSITION
POSITION
POSITION
REFIIN is connected to the REFIIN pad,
requiring an external reference source.
REFIIN is connected to the REFIOUT pad,
using the internal reference current source.
JU6 SHUNT
Not Installed
Not Installed
Not Installed
Not Installed
Not Installed
JU6 SHUNT
POSITION
POSITION
Installed
Installed
Installed
Installed
Installed
Installed
Evaluating the MAX4207
REFIIN PIN
JU7 SHUNT
Pins 1 and 2
Pins 1 and 2
Pins 1 and 2
Pins 1 and 2
Pins 1 and 2
Pins 1 and 2
JU7 SHUNT
Pins 2 and 3
Pins 2 and 3
Pins 2 and 3
Pins 2 and 3
Pins 2 and 3
POSITION
POSITION
3