BFC237321335 Vishay, BFC237321335 Datasheet - Page 15

• Manufacturer Part Number: BFC237321335
• Description: CAPACITOR, 3.3UF 100V CAPACITOR, 3.3UF 100V
• Manufacturer: Vishay
• Series: 2222373r

Specifications of BFC237321335

• Capacitance: 3.3uF
• Tolerance (+ Or -): 10%
• Voltage: 100VDC/63VAC
• Temp Coeff (dielectric): PLYE
• Mounting Style: Through Hole
• Construction: Radial
• Failure Rate: Not Required
• Seated Plane Height: 18mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 18mm
• Product Depth (mm): 8.5mm
• Product Length (mm): 26mm
• Lead Spacing (nom): 22.5mm
• Lead Diameter (nom): 0.8mm
• Operating Temp Range: -55C to 105C
• Package / Case: Not Required
• Voltage Rating, Ac: 63V
• Voltage Rating, Dc: 100V
• Capacitor Dielectric Type: POLYESTER
• Tolerance,: 10%
• Tolerance, -: 10%
• Temp, Op. Max: 105(DEGREE C)
• Rohs Compliant: YES
• Package/case: 26(Max) X 8.5(Max) X 18(Max)
• Mounting: Through Hole
• Capacitance Value: 3.3 uF
• Tolerance: 10 %
• Dielectric: PET
• Operating Temperature: -55 to 105 °C
• Lead Pitch For Radial: 22.5 mm
• Product Length: 26(Max) mm
• Product Depth: 8.5(Max) mm
• Lead Free Status / RoHS Status: Compliant

MKT371, MKT372, MKT373
DC Film Capacitors
Vishay BCcomponents
MKT Radial Potted Type
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information:
www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that stand-off pips are in good contact with the printed-circuit
board:
• For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements On Printed-Circuit Board
The maximum space for length (I
), width (W
) and heigth (h
) of film capacitors to take in account on the printed-circuit
max.
max.
max.
board is shown in the drawing:
• For products with pitch ≤ 15 mm, Δw = Δl = 0.3 mm and Δh = 0.1 mm
• For products with 15 mm < pitch ≤ 27.5 mm, Δw = Δl = 0.5 mm and Δh = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
= W + Δ
W
max.
Eccentricity
= I + Δ
I
CBA116
max.
= h + Δ
h
max.
Seating plane
SOLDERING
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”:
www.vishay.com/doc?28171
Storage Temperature
•
Storage temperature: T
= - 25 °C to + 40 °C with RH maximum 80 % without condensation
stg
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 °C ± 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
www.vishay.com
For technical questions, contact:
[e-mail]
Document Number: 28109
108
Revision: 22-Dec-10