FCN-268D024-G/20 Fujitsu Components, FCN-268D024-G/20 Datasheet - Page 21
![no-image](/images/manufacturer_photos/0/2/268/fujitsu_components_sml.jpg)
FCN-268D024-G/20
Manufacturer Part Number
FCN-268D024-G/20
Description
Manufacturer
Fujitsu Components
Datasheet
1.FCN-268D024-G20.pdf
(24 pages)
Specifications of FCN-268D024-G/20
Lead Free Status / RoHS Status
Compliant
n INSTRuCTIONS FOR CABLE ASSEMBLy
2. A ferrule and a spring are put on the cable.
a. Strip the cable insulator and put the spring, which shall
be moved at the position where it does not interfere with
assembly process.
. Set the crimping dies onto the hand press
d. Strip the shield pair of wires (27mm [1.063in.]
from the ring edge) and then wire insulation
(27.5mm [1.082 in.]).
c. A ferrule is put on the position of 2mm from
the end of the jacket
Specifications
subject to change
microGiGaCN™ FCN- 260 (D) Series
Dimensions are in millimeters (inches)
Spring
2mm (0.0 in.)
e. A shield of pair wires passed through the
aligner, and solder the wires onto the paddle
card.
b. The shield braid is turnd back
and cut the length of 13mm (0.512
in.)
After a set is completed
http://us.fujitsu.com/connectors
13mm (0.512 in.)
2