901-9602-1 Amphenol, 901-9602-1 Datasheet - Page 3

• Manufacturer Part Number: 901-9602-1
• Description: RF Connectors SMA CONN 0-18GHz 50ohms
• Manufacturer: Amphenol
• Type: SMAr

Specifications of 901-9602-1

• Gender: F
• Body Style: Straight
• Terminate To: Coaxial Cable
• Mounting Style: Cable
• Termination: Solder
• Operating Temp Range: -65C to 165C
• Operating Frequency: 0 to 18
• Body Plating: Gold
• Contact Plating: Gold
• Contact Material: Beryllium Copper
• Insulation Material: Tetrafluoroethylene
• Body Material: Stainless Steel
• Product Depth (mm): 7.92mm
• Product Length (mm): 24.5mm
• Impedance: 50Ohm
• Product: Connector
• Rf Series: SMA
• Shell Plating: Gold
• Termination Style: Crimp
• Cable Type: RG-142, RG-400
• Connector Type: Connectors - Cable
• Lead Free Status / RoHS Status: Compliant

Amphenol
®
RF:
Stainless Steel SMA Specifications
Electrical
Impedance
Frequency range
RF-leakage
Voltage rating (at sea level)
Contact resistance
Insulation resistance
Insertion loss maximum
Dielectric withstanding voltage
Mechanical
Mating
Coupling torque
N-cm)
Coupling nut retention force
Braid/Jacket cable affixment
Center conductor cable affixment
Captivated contacts
Durability (matings)
Environmental
Temperature range
Weatherproof
Thermal shock
Moisture resistance
Corrosion
Vibration
Mechanical shock
Altitude
Note: These characteristics are typical but may not apply to all connectors.
800-627-7100
50 Ω
DC - 18 GHz (semi-rigid cable)
DC - 12.4 GHz (flexible cable)
100 dB-f minimum @ 3 GHz (semi-rigid cable)
60 dB minimum @ 3 GHz (flexible cable)
≤ 500 Vrms (semi-rigid, depending on cable)
≤ 335 Vrms (flexible, depending on cable)
center contact: ≤ 2 mΩ
outer contact: ≤ 2 mΩ
braid to body: ≤ 0.5 mΩ
5,000 MΩ minimum
dB maximum = .03 √ f(GHz)
1,500 Vrms (semi-rigid cable, at sea level)
1,000 Vrms (flexible cable, at sea level)
.250-36 threaded coupling
15 in-lbs (22 / 170 N-cm) max, recom. 7 / 10 in-lbs (80 / 110
100 in-lbs (300 N-cm) min.
Crimp and solder types
Solder, unless noted otherwise
All types, unless noted otherwise
500 cycles minimum
-65°C to +165°C
crimp: w/ heat shrink tubing, solder: w/ gasket
MIL-STD-202, method 107, cond. B
MIL-STD-202, method 106 (except step 7b)
MIL-STD-202, method 101, cond. B
MIL-STD-202, method 204, cond. D
MIL-STD-202, method 213, cond. 1
MIL-STD-202, method 105, cond. C (n/a 70,000 ft)
SMA
SMA
61