5055556-9 TE Connectivity, 5055556-9 Datasheet - Page 24

• Manufacturer Part Number: 5055556-9
• Manufacturer: TE Connectivity
• Type: Power Tapr

Specifications of 5055556-9

• Gender: F
• Body Orientation: Straight
• Housing Material: Nylon
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 10
• Current Rating (max): 25/ContactA
• Pitch (mm): 2.54mm
• Contact Material: Copper Alloy
• Operating Temp Range: -55C to 85C
• Mounting Style: Through Hole
• Termination Method: Solder
• Contact Plating: Bright Tin
• Product Depth (mm): 10.16mm
• Product Length (mm): 12.7mm
• Profile: Low
• Insulation: Yes
• Pcb Mounting Orientation: Vertical
• Footprint (mm [in]): 7.62 x 2.54 [.300 x .100]
• Screw Size: M4
• Screw Material: Steel
• Current Rating (a): 25
• Faston Tab: Without
• Screw: With
• Louvertac Band: Without
• Number Of Positions: 10
• Contact Configuration: ACTION PIN Post, High Current
• Action Pin Material: Copper Alloy
• Action Pin Plating: Bright Tin
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Pcb Thickness, Recommended (mm [in]): 1.57 – 3.18 [0.062 – 0.1251]
• Lead Free Status / RoHS Status: Compliant

Product Facts
■
■
■
■
■
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
High current circuits and
signal circuits can be mixed
in the same connector
High current circuits use
MIC connector contacts
located at four corners of
the housing
Signal circuits use Standard
Drawer Connector contacts
24 positions
Hermaphroditic housing
can be mated with top and
bottom turned while
maintaining polarity
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Power Connectors & Interconnection Systems
Hybrid Blind-Mate Drawer Connectors
Hybrid Drawer Connectors
offer high current and
signal circuits mixed in the
same connector system.
High current circuits use
MIC connector contacts
which are located at the
four corners of the housing.
Signal circuits use the same
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
hermaphroditic crimp snap-
in contacts that are used
in the Standard Drawer
Connector.
The hermaphroditic hous-
ings are available in a pop-
ular 24-position size. These
housings can be mated
with top and bottom turned
while maintaining polarity.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Performance Specifications
Voltage Rating — 250 VAC
Current Rating (Max.) —
Signal Circuit (Drawer);
4 Amps — 24 AWG [0.2 mm
5 Amps — 22 AWG [0.3-0.4 mm
7 Amps — 20 AWG [0.5-0.6 mm
Power Circuit (MIC);
10 Amps
Low Level Resistance —
Signal Circuit (Drawer);
10 milliohms max. (Initial)
20 milliohms max. (Final)
Power Circuit (MIC);
3 milliohms (Initial)
6 milliohms (Final)
Dielectric Withstanding Voltage —
5000 milliohms (Initial)
2000 milliohms (Final)
Operating Temperature —
–20°C to +120°C
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
2
] Wire
2
2
] Wire
] Wire
85