1394462-3 TE Connectivity, 1394462-3 Datasheet - Page 29

• Manufacturer Part Number: 1394462-3
• Description: SOCKET, SOLARLOK, 4MM , POS
• Manufacturer: TE Connectivity
• Type: Powerr
• Series: SolarLokr

Specifications of 1394462-3

• Gender: F
• Contact Material: Copper Zinc
• Contact Plating: Silver
• Body Orientation: Straight
• Housing Material: Polyphenylene Oxide
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Current Rating (max): 25A
• Pitch (mm): Not Requiredmm
• Operating Temp Range: -40C to 105C
• Mounting Style: Through Hole
• Termination Method: Solder
• Connector Type: Photovoltaic
• Contact Termination: Crimp
• No. Of Contacts: 1
• Connector Mounting: Cable
• Colour: Black
• Rohs Compliant: Yes
• Coded, Keyed: Plus
• Features: 12 AWG
• Product Type: Connector
• Insulation Diameter (mm [in]): 5.50 - 8.00 [.216 - .315]
• Type Of Connector: Cable Coupler
• Wire Size (mm² [awg]): 4.0² [12]
• Keying: Plus
• Contact Base Material: Copper Zinc
• Contact Finish: Silver Plate
• Housing Color: Black
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Quantity: 100
• Lead Free Status / RoHS Status: Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Compliant

3.4 DC/AC Converter Receptacle
SOLARLOK Interconnection System
Assembly and Installation Guidelines
1 Place a single wire seal onto the wire and strip wire
2 Crimp the contact using the correct applicator for the wire gauge (# 114-74013)
3 Place O-ring onto the connector housing; push in wire to stop until contact locks into the housing
4 Push seal into the housing
5 Assembly of the cover cap (not available with every version) and mounting in front panel
■
■
■
All specifications subject to change. Consult Tyco Electronics for latest specifications.
(single wire seals are not available with every version).
Required panel mount hole diameter: Diameter 12.5 mm.
The panel thickness must not be under 1.0 mm.
For environmental protection of the unmated connector, use of the covering cap is recommended.
Cover:
Part No. 1394739-1
(continued)
Catalog 889753-3
Revised 6-2008
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 9
27