641300-2 TE Connectivity, 641300-2 Datasheet - Page 2

• Manufacturer Part Number: 641300-2
• Description: CONTACT, SOCKET, 26-18AWG, CRIMP
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: MRr

Specifications of 641300-2

• Pitch (mm): Not Requiredmm
• Gender: SKT
• Number Of Contacts: 1POS
• Number Of Contact Rows: Not Required
• Mounting Style: Cable
• Body Orientation: Straight
• Contact Plating: Gold Over Nickel
• Termination Method: Crimp
• Current Rating (max): 9A
• Voltage Rating Max: 250VAC
• Contact Material: Phosphor Bronze
• Housing Material: Not Required
• Housing Color: Not Required
• Product Height (mm): 3.48mm
• Product Length (mm): 16.76mm
• Product Depth (mm): 3.68mm
• Contact Termination: Solder
• Wire Size (awg): 26-18
• Contact Current: 9A
• Rohs Compliant: Yes
• Connector Type: Contact
• Contact Gender: Socket
• Product Type: Contact
• Strain Relief: With
• Wire/cable Type: Discrete Wire
• Termination Method To Wire/cable: Crimp
• Pcb Mount Retention: Without
• Contact - Rated Current (a): 9
• Hot Pluggable: No
• Operating Voltage Reference: AC
• Operating Voltage (vac): 250
• Wire/cable Size (awg): 18 – 26
• Wire/cable Size (mm²): 0.12 – 0.8
• Wire/cable Size (cma): 236.823 – 1,578.82
• Profile Height (y-axis) (mm [in]): 1.94 [0.076]
• Length (x-axis) (mm [in]): 16.76 [0.6598]
• Width (z-axis) (mm [in]): 1.94 [0.076]
• Contact Type: Socket
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.76 [29.92]
• Contact Design: Formed Socket
• Mating Alignment: Without
• Ul Voltage Rating (vac): 250
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Operating Temperature (°c [°f]): -55 – +105 [-67 – +221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.635 – 2.92 [0.050 – 0.115]
• Application Use: Wire-to-Board, Wire-to-Board / Wire-to-Wire, Wire-to-Wire
• Contact Transmits (typical Application): Signal (Data)/ Power
• Packaging Method: Bag
• Lead Free Status / RoHS Status: Compliant
• For Use With: Miniature Rectangular Connectors
• Lead Free Status / Rohs Status: RoHS Compliant part

104
Performance
Characteristics
(Continued)
Maximum Current—Maximum cur-
rent rating of Miniature Rectangular con-
nectors is limited by the maximum oper-
ating temperature of the housings which
is 105°C including the temperature rise
of the contacts which is a maximum of
30°C. There are several variables which
have a direct effect on this maximum
current-carrying capability for a given
connector and must be considered for
each application. These variables are:
Wire Size—Larger diameter wire will
carry more current since it has less
internal resistance to current flow and
thus generates less heat. Longer wire
lengths also enhance current-carrying
capabilities since the wire conducts heat
away from the connector.
Connector Size—In general, the more
circuits in a connector, the less current
can be carried.
Ambient Temperature—The higher
the ambient temperature, the less current
can be carried in any given connector.
Printed Wiring Board Conductor
Size—The finished trace conductor
width and thickness should be maxi-
mized to allow for the greatest current-
carrying capacity and heat dissipation.
Miniature Rectangular connectors also
will withstand the following tests:
Vibration—10-55-10 cycles per
minute at .06 inch total excursion
Physical Shock—18 drops, 50 G saw-
tooth at 10 milliseconds
Housing Panel Retention—
50 lb. min.
Housing Lock Strength—20 lb. min.
Thermal Shock— -55°C to +85°C
Temperature-Humidity Cycling—
25°C to 65°C at 95 RH
Corrosion—48 hr. at 5% salt
concentration
Related Product Data
Product Specifications
108-1022 (MR) Miniature Rectangular
108-1078 (MR) Miniature Rectangular
Catalog 82181
Revised 5-06
www.tycoelectronics.com
Connectors
Headers
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Soft Shell
Pin and Socket Connectors
Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized
Wire-to-Wire
MR Calculated Current Table
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection
of a connector family. All applications should be tested by the end user. The values listed are per circuit for fully loaded
housings being 100% energized. Note: All combinations were not tested and this chart contains interpolated and
extrapolated values.
Wire-to-Board
Due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a sep-
arate current carrying chart for our printed circuit board header products. However, the above Wire-to-Wire charts may
be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. For vertical head-
ers, only 95% of the Wire-to-Wire value should be used. For right-angle headers, only 75% of the Wire-to-Wire value
should be used. The charted values are only a tool for connector selection and will require the customer to fully test
their application.
(MR) Miniature Rectangular Connectors
Number of
Circuits
12
15
20
24
36
2
3
4
6
9
Minimum Wire Lengths for T-Rise vs. Current Testing
Note: If wire lengths used are less than those listed above, the current-
Termination Resistance/Contact Crimp Tensile Force
Note: This is the total resistance between wire crimps of a mated pin and socket.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
AWG
26
24
22
20
18
9.00
8.50
7.00
6.00
5.00
4.50
4.50
4.00
4.00
3.50
AWG
18
carrying ability of the system will be reduced due to less heat being
conducted away from the connector. The customer should fully test
all applications.
30
28
26
24
20
Wire Size
mm
.12
.2
.3
.5
.8
Min. Length (in.)
2
2.6
3.2
4.1
5.1
7.8
8.00
7.00
6.50
6.00
5.00
4.50
4.00
4.00
3.50
3.00
20
Current
(Amps)
Test
1.5
4.5
1
3
6
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
Termination
Resistance
(Continued)
(Max. Init.)
Resistance
Milliohms
Wire Gauge
5.00
5.00
4.50
4.00
4.00
6.50
6.00
5.50
5.00
4.00
4.00
3.50
3.50
3.00
2.50
22
AWG
18
16
14
12
10
lbs.
14
14
30
Min. Length (in.)
5
8
Tensile Force
Force (Min.)
Contact
Crimp
11.3
13.7
16.4
19.3
5.50
5.00
5.00
4.00
4.00
3.50
3.00
3.00
2.50
2.00
9.4
24
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
133
22
36
62
62
N
5.00
4.50
4.00
4.00
3.50
3.00
2.50
2.50
2.00
2.00
26