02011602102 HARTING, 02011602102 Datasheet - Page 6

• Manufacturer Part Number: 02011602102
• Description: BackPlane Connector, Printed Board; 160 Poles; Printed Board; 1; Male; 3 mm
• Manufacturer: HARTING
• Type: Shrouded Headerr
• Series: har-bus 64 Seriesr

Specifications of 02011602102

• Pitch (mm): 2.54mm
• Gender: M
• Number Of Contacts: 160POS
• Number Of Contact Rows: 5
• Mounting Style: Through Hole
• Body Orientation: Right Angle
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Current Rating (max): 1A
• Product Height (mm): 11mm
• Product Length (mm): 93.9mm
• Product Depth (mm): 20.28mm
• Angle: Right
• Connector Configuration: Rows z,a,b,c and d
• Connector Type: Printed Board
• Current, Rating: 1 A
• Length: 3 mm
• Length, Overall: 93.9 mm
• Length, Pin: 3 mm
• Mounting Hole Size: 2.8 mm
• Number Of Rows: 5
• Pin Spacing: 2.54 mm
• Pitch: 2.54
• Primary Type: Industrial
• Shell Size: 64
• Special Features: Backplane
• Standards: IEC 60603-2
• Termination: Solder
• Product Type: Male
• Number Of Positions / Contacts: 160
• Mounting Angle: Right
• Termination Style: Solder Pin
• Contact Material: Copper Alloy
• Lead Free Status / RoHS Status: Compliant
• Lead Free Status / RoHS Status: Compliant

02 .
06
System description
Bridging variants:
1. The empty card slots may be assembled with
2. Bridging
3. Bridging by using IC's with internal integration
4. The new 5-row
dummy cards, that bridge the daisy-chain
lines.
5 jumpers on the back plane manually.
OR the function may accept automatic daisy-
chaining.
allows an automatic switching. In the case of an
unmated daughter card the connector bridges
the signals at positions a21-22, b4-5, b6-7,
b8-9 and b10-11. The switch elements open
automatically when the daughter card is mated,
so that the daughter card accepts the ongoing
signal daisy-chain.
can
be
achieved
connector with switches
by
with switches
inserting
As a typical multiprocessor bus,
VME has to distribute processor
information continuously accord-
ing to the right priorities.
This is done through the well
known daisy-chain lines.
The VME protocol requests 5
daisy-chains on position 1 of
every backplane.
These lines are defined to go
through every daughter card.
Therefore, in case of unloaded
card slots the signal have to be
bridged across the connector.
IN
OUT
OR-gates
female connector
male connector
daughtercard