DBM25S Cinch Connectors, DBM25S Datasheet - Page 93

• Manufacturer Part Number: DBM25S
• Description: D SUB CONNECTOR, STANDARD, 25POS, RCPT
• Manufacturer: Cinch Connectors
• Type: D-Subminiaturer

Specifications of DBM25S

• Number Of Contacts: 25POS
• Number Of Terminals: 25
• Plug / Receptacle: SKT
• Contact Plating: Gold Over Nickel
• Body Orientation: Straight
• Mounting Style: Panel
• Number Of Ports: 1Port
• Number Of Contact Rows: 2
• Operating Temp Range: -65C to 125C
• Termination Method: Solder Cup
• Current Rating: 5A
• Housing Material: Steel
• Contact Material: Phosphor Bronze
• Product Length (mm): 53.04mm
• Product Depth (mm): 12.55mm
• Product Height (mm): 12.55mm
• No. Of Contacts: 25
• D Sub Shell Size: DB
• Connector Body Material: Metal
• Gender: Receptacle
• Contact Termination: Solder
• No. Of Mating Cycles: 500
• Body Material: Metal
• Connector Type: D Sub
• Lead Free Status / RoHS Status: Not Compliant

D-subminiature
Auto-Clinch ™ D Semi-Automatic Termination Tool
Auto Clinch D is a semi-automatic, pneumatically powered, and electrically
controlled termination machine designed to terminate IDC D-subminiature
connectors. It employs a selective programmer and a common nest for
all four connector sizes and can be equipped to terminate metal shell
connectors. It can also be optionally equipped with remote visual color
code display for training sequences. It has a provision for omission of wires.
Part No.: ACD-432
Certi-Clinch ™ D Field Termination Tool
*For 24-26 AWG Wire
Certi-Clinch D is designed for mass termination of individual wires,
eliminating wire stripping, soldering, and crimping. It handles all four
connector sizes, is readily portable, and requires no set-up time and little
operator time. Rugged, all-metal construction affords trouble-free long life.
For metal shell IDC D-subminiature connectors.
Part No. SD-CCWN
For all-plastic IDC D-subminiature connectors.
Part No. SD-CC
Conversion nest for converting all-plastic type to metal shell.
Part No. SD-CCN
Uni-Clinch ™ D Single-Wire Hand Insertion Tool
Designed to insert one 22-26 AWG wire at a time, Uni-Clinch D is used
as a field repair tool by field service engineers.
Part No. SD-UC
Super D ™ Manual Stay Band Tool
Designed for applying the steel stay band/strain relief to the cable before
termination of wires to the connector, the manual Stay Band Tool applies
both stay band sizes to the full range of cable sizes.
Part No. SD-MSBT
Call Toll Free: 1 [phone]
NOTE: All termination tools on this page are used in conjunction with T* Series D-subminiature connectors.
IDC
Termination Tools
4-100
Auto-Clinch D Tool
Certi-Clinch D Field
Termination Tool
Uni-Clinch Hand
Insertion Tool
Manual Tool