DBM-13W3P-1A0N-K87 ITT, DBM-13W3P-1A0N-K87 Datasheet - Page 89

• Manufacturer Part Number: DBM-13W3P-1A0N-K87
• Manufacturer: ITT
• Type: D-Subminiaturer

Specifications of DBM-13W3P-1A0N-K87

• Number Of Contacts: 10Signal/3CavityPOS
• Number Of Terminals: 10
• Plug / Receptacle: PIN
• Contact Plating: Gold Over Nickel
• Body Orientation: Right Angle
• Mounting Style: Through Hole
• Number Of Ports: 1Port
• Operating Temp Range: -55C to 125C
• Termination Method: Solder
• Current Rating: 7.5A
• Housing Material: Polyester
• Contact Material: Copper Alloy
• Product Length (mm): 53.04mm
• Product Depth (mm): 18.78mm
• Product Height (mm): 12.55mm
• Lead Free Status / RoHS Status: Compliant

88
D Subminiature
Insertion/Extraction Instructions for Coaxial, High Power and High Voltage Contacts
Insertion Tool
No insertion tool is required. The contact is easily
snapped in from the rear of the connector
manually.
Extraction Tool
CET-C6B-2
The CET-C6B-2 tool extracts all coaxial, high
power and high voltage contacts (plug and
receptacle).
Description
CET-C6B-2
070064-0002
Part Number
Insertion Instructions
Operating Instructions
To extract the coaxial contact, hold the tool by the
body and insert the tip into the front of the contact
cavity until it bottoms and closes the coaxial
retaining ring. Holding the body in this position
securely enough to keep coaxial retaining ring
closed, push the plunger; contact will be pushed
out of the rear of the assembly.
Dimensions are shown in mm (inch)
Dimensions subject to change
Combo D