202169-4 TE Connectivity, 202169-4 Datasheet - Page 52

• Manufacturer Part Number: 202169-4
• Description: M-SERIES HALF SHIELD KIT
• Manufacturer: TE Connectivity
• Type: Shieldr

Specifications of 202169-4

• Rohs Compliant: YES
• Product Type: Hardware
• Shield Material: Steel
• Screw Material: Steel
• Hardware Type: Shield
• Mounting Hardware: None
• Shield Style: Two-piece
• Screw Plating: Zinc with Non-Hexavalent Chromium
• Shield Size: Short
• Cable Exit Angle: 45°
• Cable Diameter (max.) (mm [in]): 25.40 [1.000]
• Shield Plating: Nickel
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / RoHS Status: Compliant

52
Dimensions are shown for reference
purposes only.
M Series
Pin and Socket Connectors
Posted Connectors
Posted connectors are
furnished preloaded with
Size 16, posted contacts
(as shown on page 32) and
are specifically designed
to be wired with hand
tools and semiautomatic
machines. The cavity
centerline spacing is too
close to accommodate
the heads and mandrels
of fully automatic machines.
Post configurations of the
preloaded contacts are
available for accepting
TERMI-POINT Clip and
wrap-type terminations.
Dimensions are in inches and mil-
limeters unless otherwise specified.
Values in brackets are metric equiva-
lents.
Posted connector housings
are made of black phenolic
or diallyl phthalate and are
available in sizes ranging
from 6 thru 104 positions.
They will mate with corre-
spondingly sized standard
connector (except .200
[5.08] grid) housings
loaded with Size 16 crimp-
type contacts. It is not
recommended to mate two
posted connectors. Since
the preloaded posted
contacts are rigid in the
housing, mating two posted
connectors, particularly of
the larger sizes, would be
difficult.
Specifications subject to change.
Posted connectors can
be substituted for standard
connectors in the Connector/
Hardware Selection Charts,
pages 10 to 25.
Tyco does not recommend the use
of shields or strain relief clamps with
posted connectors because of the
potential of shorting.
Technical Support Center
1-800-522-6752
www.tycoelectronics.com
Catalog 82003
Revised 3-01